Jump to content
SAU Community

Recommended Posts

Yes, I have searched - but didn't find exactly all the stuff I wanted to know. So:

1) What is (more or less) max boost for standard RB20 Turbo ?

2) Will R33 FMIC piping work with RB20 or is the pipework different orientation ?

3) Is the front/dump pipe of an R32 same as an R33 ?

4) Is the R32 4door exhaust (cat back) the same length and orientation as a 2 door version ?

5) Is the GTS-4 suspension (front and rear) same as a GTS-t or GTR or neither ?

6) Can you disable front wheel drive ina GTS-4 same as GTR (by pulling a fuse , which one)

7) Will adjustable exhaust cam gear give same benefits as RB25DET at 4 deg retard ?

8) Is the exhaust cam gear same as RB25DET ?

9) Is the AFM in RB20DET same as RB25DET - and will Z32 AFM help with increased resolution ?

10) Is it worthwhile getting RB20 turbo hiflowed with new (steel) wheels ? At what cost ? Or is it simply better/less cost to get a 2nd hand HKS 2430

11) Is the RB20DET and RB25DET exhaust manifold the same ?

12) Is mounting a FMIC on the R32 similar to the R33 ? Do you need to shave the front bar ?

13) What can max power the GTS-4 gearbox handle ?

14) Does GTS-4 come with LSD at the rear ?

15) Is the rear diff same as a GTR (ie R200) ie if I found an R200 locker would it bolt up ?

16) Who does R32 ECU re-chips / how much ? Is it better to just get an SAFC / Fuel Controller ? I know this doesn't adjust timing - but was thinking the cam gear could take care of this for moderate power. (AP Eng PFC too expensive for an R32 - bad cost/benefit for the value of the car)

17) With GTS-4 do the same tyre width on all 4 wheels apply - like GTR ?

18) What is safe power (rwkw) for standard internals ?

19) What sort of brakes are on the front of a GTS-4 , I think 2 pot - Will the R33 4 pots bolt on ? What size discs ?

Sorry for all the questions , some might be rudimentary I guess....

Thanks in advance Roy - for your help on these (as I know you will know all the answers - he he)

CHeers,

Link to comment
https://www.sau.com.au/forums/topic/80165-more-r32-gts-4-questions/
Share on other sites

1) What is (more or less) max boost for standard RB20 Turbo ? - 14psi

2) Will R33 FMIC piping work with RB20 or is the pipework different orientation ? - drivers side return pipe is different

4) Is the R32 4door exhaust (cat back) the same length and orientation as a 2 door version ?- 4 door is slightly longer

5) Is the GTS-4 suspension (front and rear) same as a GTS-t or GTR or neither ?-gtr i believe

8) Is the exhaust cam gear same as RB25DET ?-yes, inlet adj. cam gears are good as there is no vvt i think....?

9) Is the AFM in RB20DET same as RB25DET - and will Z32 AFM help with increased resolution ?-cubes is using a series 1 r33 i believe, and a z32 can be used as well...

10) Is it worthwhile getting RB20 turbo hiflowed with new (steel) wheels ? At what cost ? Or is it simply better/less cost to get a 2nd hand HKS 2430-previous owner of my car had this done, and it cost roughly $1100. It just made ~218rwkw @ 1.1bar recently on a tune

11) Is the RB20DET and RB25DET exhaust manifold the same ?- yes

12) Is mounting a FMIC on the R32 similar to the R33 ? Do you need to shave the front bar ? - yes

16) Who does R32 ECU re-chips / how much ?- Dr Drift...on these forums

I hope i got most of those right :cheers:

3) Pretty certain they are the same.

5) Same as GT-R

6) Yes

13) I'm running 180 Awkw through the stock gearbox

14) Viscous LSD, I believe

17) YES

19) 4-spotters front, 2-spots rear, probably the same as R33. A set of slotted rotors doesn't hurt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
×
×
  • Create New...