Jump to content
SAU Community

Recommended Posts

Heat Treatments - Reece McGregor

8.75 @ 159 mph

R32 GTR

T51R SPL

Slicks

http://mywebpages.comcast.net/insdav3/875.mpg

Brenhan filmed this video clip.

Congrats to everyone involved. This is starting to get interesting! :D

Link to comment
https://www.sau.com.au/forums/topic/8084-new-skylne-gtr-record-875-159mph/
Share on other sites

Originally posted by Boxhead

merli - is that the NZ record? coz the banner above start line says dragway NZ....

which would mean that mario still owns aussie record.

That is correct.

I understand its anyones right to have their say and view their thoughts on matters,but I think its time that I set the record straight about mario and his involvement in HIS GTR700 project,Comments on the forum about cheque book racing etc.Its fair to say that Mario has paid for the project and owns the vehicle in full  

Its not fair to say that thats all his involment in the project is.  

Mario has been very heavily involved in the development of the vehicle .Componentry ,combinations,set up.Those who have been involved in a project of this caliber will undestand what its all about ,for those who havent I hope you understand when I say that ,building a vehicle with the potential that marios has  

is never as simple as FLEXING YOUR MASTERCARD.Who in their right mind will SELL you a combination that will ultimately challenge them.Mario spent most of his spare time reserching  

possible combinations and ultimatelly had the final say.Mario definately didnt just buy myself (CRD) or Andrej the driver.  

Its a full team effort to build and all involved have a purpose and their place. Understand this first then comment.  

Jim Souvas  

CRD

there's your prescious FACTS!!!

I agree with RONIN, there is no need for snide comments.

I think the times both Reece and Mario have achieved are amazing. I just wonder what time they get without slicks and running Nitto's, like most do in Japan.

See'ya:burnout:

Congrats!!!!!!!

Another one for tha SKYLINES!!!!!!!

Both GTR700 And the heat preparations R32 deserve RESPECT!

The cars and their owners!

We all knw how hard it is to do up, develope, maintain and continue to progress, in our hobby we do it on a smaller scale to these guys they must have it 3 4 times harder, so much deserved respect!

Its one thing to be critical (and i only see it fitting to be critical if you are on or passed the person or thing you are criticising) and another to be jealous!

Once again a MAJOR CONGRATS!!!!!!

Its a step forward in our hobby/sport for our cars (Skylines)!:D:( :burnout:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Messing around with. Twin kit for. Rb30/26  
    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
×
×
  • Create New...