Jump to content
SAU Community

Recommended Posts

Has anyone put an aftermarket cruise control system into their manual Skyline? I cover a lot of k's for work in an R34 and cruise would be fantastic.

Just wondering if anyone's done it, or at least heard of kits that work well.

Thanks........ :D

Link to comment
https://www.sau.com.au/forums/topic/80967-cruise-control-in-a-manual-skyline/
Share on other sites

I'd like to know as well. I don't want to hi-jack jmac, but I have cruise control as part of my rb20 related stuff in the cef and if I could put a cruise control accell plate onto my sr20 then that'd be great. I have all the other part of it (the cable and controller). I was thinking if the normal cruise control works by detecting the tension on the accel cable, and simple KEEP it at the same tension then you should be able to use any wrecked nissan one circa models a31, r32, r33, r34 etc.

It might, off course, work vastly differently... anyone know ?

Has anyone put an aftermarket cruise control system into their manual Skyline?  I cover a lot of k's for work in an R34 and cruise would be fantastic.

Just wondering if anyone's done it, or at least heard of kits that work well.

Thanks........ :O

hey, i have an aftermarket kit in my car, it was fitted by the previous owner.

i cant remember the brand name, but i have seen them for around $200

it would have been in there for a few years now, and i have used it many times, it works really well and is smooth when regulating the throttle.

hey, i have an aftermarket kit in my car, it was fitted by the previous owner.

i cant remember the brand name, but i have seen them for around $200

it would have been in there for a few years now, and i have used it many times, it works really well and is smooth when regulating the throttle.

sweet - if you come up with any clues re the brand please let me know!

anyone else? is this just a case of walking in to autobarn and saying "duhhh take my moneys"?

i had cruise in my last car and really didn't use it... even though i drove 45mins each way to and from uni every day for 4 years

my 2c to think about: will you use it enough to justify the possible $300+ price tag?

in city driving, mostly not, but the run i do to work (>1 hr/day) is through lots of boring 70-80-90 km/h zones, fairly light traffic and straight roads notorious for having white vans parked behind bus shelters and blokes hiding behind trees pointing hairdryers at you.

$300 is only 2 decent speeding fines... but your point is duly noted. :P

in city driving, mostly not, but the run i do to work (>1 hr/day) is through lots of boring 70-80-90 km/h zones, fairly light traffic and straight roads notorious for having white vans parked behind bus shelters and blokes hiding behind trees pointing hairdryers at you.

$300 is only 2 decent speeding fines...  but your point is duly noted.  :P

mine was also lots of stright driving. thing is, with so many traffic lights and speed changes that you mentioned, cound the time where you are at a speed and not accelerating or braking from the lights or to dodge cars, or for roundabouts etc etc

the time when you are cruising at speed is minimal

you would end up activating the cruise about 10-15 times in a trip... clearly not worth it i think

also, they allow you to 'relax' more behind the wheel, making your rection times absolutely shithouse

but i'm not going to say anymroe as its your money and if you have your heart set on it then fair enough

in that case, i say check out autobarn or supercheap - they probably have some generic kits that are pretty plug-and-play type of things...

best of luck,

Warren.

sweet - if you come up with any clues re the brand please let me know!

anyone else?  is this just a case of walking in to autobarn and saying "duhhh take my moneys"?

hey ill have a look for u soon and post it up but i can tell u now it is not anything fancy, but works well.

Cruise control kits read your speed signal and dont need to be calibrated. They will see the pulse speed when you "Set" it while driving and will aim to keep the car at that pulse rate by modulating the throttle control in the engine bay using the cable and motor/diaphram thing. It knows that going one way increaces teh speed (pulse) and the other way will decreace it, its so basically simple it can be built from scratch if you knew how to.

With regards to manual or auto, its compatable on both, but you will need to wire up the safty cut-out differently. Normally in Autos it linked to the brake and also the handbrake. When you setp on the pedal or pull the hand brake it switches off and goes back to manual mode. In a manual car, it will be linked to the clutch as well as the brake and handbrake. That way it cuts off if you put your foot on the clutch to change gears.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...