Jump to content
SAU Community

Recommended Posts

Normally oils dont help a worn viscous diff because the viscous unit itself is sealed and uses its own internal fluid. Normal clutch or torsen type LSDs use the diff fluid's frictional characteristics to lock up so changing oils in those can help..

When I looked in to it a reco viscous is not an option as the the thick fluid stuff that makes the lsd a lsd is very very difficult to get a hold of.

The only real option is to shim it up. It costs around $350 or so. I'll be doing this as mine is stuffed.

Mine has been single spinning out of a corner now for 30,000km's.

Its now got to the point where its spinning one wheel in a straight line, it does this in second also.

So yer.. no traction for me. Sucks.

I've seen quite good results from shimming diff's.

Providing they are treated right and not consistently drifted they are fine and last quite a while. Well worth the $300 odd anyway.

He probably didn't want to shimm it. :)

Thommo - you said you took yours to Unique - how much did they charge you to get the diff+gearbox oil changed?

I'm looking at giving my car a major service - and reading this looks like my diff's on the way out as well, don't push it too hard but when I do tyre's light up on the right side, in the wet they just spin the whole way up the street - although i'm not sure if this is just 1 wheel (right) or both.. if it's both it's fine.. if it's 1 it's not..

Thommo - you said you took yours to Unique - how much did they charge you to get the diff+gearbox oil changed?

I'm looking at giving my car a major service - and reading this looks like my diff's on the way out as well, don't push it too hard but when I do tyre's light up on the right side, in the wet they just spin the whole way up the street - although i'm not sure if this is just 1 wheel (right) or both.. if it's both it's fine.. if it's 1 it's not..

Hey mate,

it was $260 - not the cheapest I guess (oils - 10% discount, plus one hour labour), but I don't have the tools / energy to know how to do it :)

Damn 1.5 way LSDs are expensive, i'll just deal with not being able to do dumb stuff in first gear for the moment I think :)

Cheers,

Tommo.

in my r33, when i am going below 15km/h around a tight (90 degree) corner the inside wheel spins easily

but when i am pointed straight ahead, in first gear both wheels start spinning and continue spinning at the same time for sure even on the spot

Thats pretty much what a healthy standard LSD does....they are limited slip but they are pretty loose from the factory so that they don't skip around like a nice tight mechanical diff would.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
    • Hmmm, interesting. Makes me wonder whether there is bias as well. It's the cheapest fuel, so it is used for all kinds of ill-maintained shitboxes which are bound to have issues regardless. Nicer cars tend to require higher octane rated fuel and can't use it anyway. FWIW, the official NSW E10 facts page is decent. 
×
×
  • Create New...