Where do i start with internals

[netrati]

You had 108rwkw to start with?

[wheels_24]

yer with just a fmic and 3" cat back but standard everything else it was 108rwkw before any off these mods went on

[Tonba]

++++

Greetings All.

After thinking about it...the RPM that he reaches full boost seems to be right....but the power you are making doesnt seem right...

Tuning??

Cheers,

--Tonba

++++

[Tonba]

++++

Greetings All.

It also depeds on what type of vehicle you are trying tp build...Streeter...Dayly Driver/Weekend Warrior...Track demon, but still docile enough for street driving...

Also what do you expect from your turbo?? Put your fut down at ANY RPM and be pushed back into the seat...or an on/off style power delivery...?

Cheers,

--Tonba

++++

[Angry]

108rwkw with 3inch cat back and a FMIC?

that sounds pretty 5hit house man

my ageing 88 model redtop rb20 made 116rwkw with 3inch exhaust and pod. the rest was stock

i was at the understanding that most silvertops will making that much (110-118rwkw) in bog stock trim.

have u had your compression checkd on your engine?

Matt

[wheels_24]

Yer the car was a bit sick it was the tune when i got 108rwkw after i had it tuned i put a pod and BOV on i guess it all helps a little we got 138rwkw with standard standard everything else which i thought was good. Then the standard turbo sh8t it self hense why i have done all this work to the car. Well i drive the car every day so i guess i wouldn't wont to much for power i guess but you know what they say a person that has power always wants more hehehe. I don't mind the turbo coming on late although i wouldn't mind it coming on about 3500 instead of the 4200, the guy that gave me the turbo says that it has the smallest exhuast housing on it which if i am not mistaken helps boost earily not sure guys

[nemz]

is it just me or did u say u have a stock fuel pump? if you do u need a bigger fuel pump, also cam gears and some pulleys wouldnt go astray

[predator]

your next step maybe should be porting of the head, and some cams ~$2k or so.

Signs point to that turbo not being a full '650hp' turbo - but hey.. why bother with internals when you can squeeze a bit more out, and keep going until you have reason to bother with internals.

You might get another 10-30rwkw (~235rwkw), which might be the real level of that turbo. Thats a good amount of power from a RB20det.

[wheels_24]

thanks guys this is helping a far bit and giving me a lot of options. The guy that tuned my car at rank rotory said the same thing about the fuel pumps they told me that i should be able to get maybe another 10 - 20% out of it as i will be able to turn the fuel presure up a little. I really am trying to get to that 250rwkw mark not sure if i will get there what will i need to get into the 12's for the 1/4 mile i am going next month to see what can get with what i have now.

[Tonba]

++++

Greetings All.

Some things you might want to consider before cracking open the block for a rebuild...

• Port & Polished Head
  
• Adjustable Cam Gears
  
• Extrude Honed Exhaust Manafold
  
• Larger TB with a Z32 Airflow Meter (Better for tuning)
  

But before you do any of these a GTR fuel pump might be the go...

My 2c,

--Tonba

++++

[R31Nismoid]

if it has a .63 its only a 500hp turbo tops.

i wouldnt worry about internals. I doubt you'll stress them with that turbo

it'll pump out 240 for you easily enough

[Roy]

Some things you might want to consider before cracking open the block for a rebuild...

• Port & Polished Head
  

 

That would involve removing the head, so new head gasket, plus labour etc. Much nicer solution would be to just throw some cams in. The cost of remove and install head, head gasket, porting and polishing etc would be a lot more...and drama being that the std cams could be the limiter, more then the ports when std????

++++

• Extrude Honed Exhaust Manafold
  

 

If he is still running the std manifold with a 45mm external wastegate...then id say dont bother extrude honing it, again the cost in labour to remove and install plus extrude honing would be better spent on getting a good quality / deisng manifold. But im assuming since he is already running the external gate he has the manifold side of things sorted.

 

• Larger TB with a Z32 Airflow Meter (Better for tuning)
  

 

 

He is running a Wolf 3D so would be amazed if he was still running an AFM...though the larger TB could be an interesting thing to try because i have often wondered what if any is to be gained.

And sorry not meaning to be picky, but i wouldnt even go for a GTR fuel pump, for the same money or even less you can get a Bosch 040 which is new and flows more and is easy to fit....just another opinion:)

[wheels_24]

i was thinking of buying a walbro i can get one of here from happypig i think he goes by for $165 would this be ok. I am not running a AFM i just have a 3" piping from the pod. What would i be looking at in gaining with a set of cams in terms of rwkw and cost involed in this sort of operation

[PHATGTR]

That depends what duration you go for and whether your looking at top end power or more mid range.

[wheels_24]

hey guys it seems that my car isn't running on the 16psi i thought it was it turns out that it is on;t running on about 12 as i founf out last night well thats all my boost gauge would go up to would this be correct in making this sort of power with this boost. I thought they tuned it to 16 but it turns out they didn't they said they would turn it up to 16 with a bigger fuel pump i guess then i will get my extra 30 - 40 rwkw

[MsG_ChRiS]

i say run it on another dyno 729NM doesnt sound right with that kw figure

other than that get some new cam gears (mayb a step bigger cams), extrude hone what ever you can afford to (even you turbo if you want) and most definetly upgrade your fuel pump man. Probally a good idea to get the Z32 afm too.

The most important step however is giving your car a good tune!!

[wheels_24]

i have had a few people say that to me about the 729nm i am going to get the fuel pump and tune again then run it on 2 different dyno's see what the difference is, i am not running a AFM i am running wolf 3D so i have taken it of and put all new 3" piping in