Jump to content
SAU Community

Recommended Posts

  • Replies 142
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

LINEUPS Liz!

Godskitchen rolls into Metro City with a bang this Friday night, October 7th. With such a huge line up you're going to need to plan your time wisely with these line up times to make it through the night.

GK 2005 LINEUP TIMES

9.00-10.00pm Adam Kelly

10.00-11.00pm Kenny L

11.00pm-1.00am NICK WARREN

1.00-2.30am BT

2.30-4.00am GABRIEL & DRESDEN

4.00-6.00am ABOVE & BEYOND

yep i do!

Courtesy of ITM and/or Teknoscape...

All pre sold tixs have sold out for GK 2005,

there will be door sales, they are $80

doors open at 9 pm and we suggest peeps get there early to get em

GK 2005 LINEUP TIMES

9.00-10.00pm Adam Kelly

10.00-11.00pm Kenny L

11.00pm-1.00am NICK WARREN

1.00-2.30am BT

2.30-4.00am GABRIEL & DRESDEN

4.00-6.00am ABOVE & BEYOND

I will take a wild guess and say gabriel & dresden were the standouts?

G&D were VERY MELLOW compared to warren, BT and Above and Beyond.

f**ken awesome show but, metro's was a top location

nice seeing dan the man, sneeza, gradenko, boostzor, b005t, gts_evilution (yes i saw u running around)

and of course the usual rice guys :P




  • Latest Posts

    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
×
×
  • Create New...