Jump to content
SAU Community

Recommended Posts

I have finished putting doing all the mods to my car in the list that follows:

-To4e turbo and turbosmart external gate on modded standard manifold

-600x300x73mm PWR Tube and Fin Intercooler Core with custom endtanks

-550cc series 5 13B Turbo injectors

-Z32 airflow meter

-Turbo XS BOV

-Oil filter relocator with oil cooler

-custom aluminium intercooler pipes

-Oil Catch can

-3'' mandrel exhaust from turbo

-2 x 12'' thermo fans

all this is bolted to a stock RB20 with 100,000kms on the clock.

Is being tuned tommorow and i am planning on running about 16psi of boost.

If someone could post some pics for me that would be good.

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Clint,

What ECU are you using? I'm guessing you're getting Martin to do a remap of the stockie? Wouldn't mind popping down for a look if thats the case. I'm just down the road from Tilbrook's

Matt

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/#findComment-118889
Share on other sites

Yeah nothin' wrong with the stock ECU once mapped to suit mate. If you keep tweaking & need further tuning then I guess it starts to get a touch costly.

It should make good power. You never know it may well get more than mine. Considering the 32 is lighter you won't need as much grunt to be as quick anyway!

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/#findComment-118929
Share on other sites

Well I did everything myself and only got stuff when it was cheap, this has taken about 6months. All up i spent about $6000, with new radiator thermofans and doing everything properly. While not being cheap is far less than some would spend on the basics.

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/#findComment-119089
Share on other sites

Clint,

I got almost the same setup as you, your ahead of me with the z32 afm & the injectors, but i sourced a r32 power fc :P

(did you upgrade your fuel pump)

Regarding how much power you be making, well im guessing at least 240rwkw

you can go even futher depending on the spec & rating of the turbo.

Regarding, remaping ecu or aftermarket.

Well after you installed all the mods & thats all you want 2 be done with your car then cheapest method is remapping it.

est cost $700+ inc dyno time

Downfall to it is that its fixed, if you wanna lets say your not happy with 250rwkw & want more & u decide to 2 some serious work to the car, eg piston, cams, porting head then you require to remap the ecu, which then total your cost of $1400+

Aftermarket.

Cost from $1200+ & dyno time est $300+.

Downfall is the price they are an expensive price of equipment, if your not goin over 190rwkw then forget about it go either mapping a r32 gtst ecu or buy a piggyback system.

If you plan to go ahead that 190kw mark then aftermarket gives u the freedom to do so, once its tuned for your car it can easilly be retune for other features that you may want to do to the car on future stage.

My Theory is done it right once & get it over & done with.

Well everyonce is askin for a price, guys remember theres no such thing as cheap performance.

If you have a stock car & want to be in the 200rwkw mark then heres a list that might get u there.

(ball park fugure) power

Cat back exhaust (for time being, will explain later) = $1200+

Larger front mount + piping = $1500+

Fuel pump = $200+

Injectors & fuel pressure regulator = $500min for injectors fuel pres reg go for around $150+

Power FC+H/C = $1200+

Boost gauge/Boost controoler = gauge $150+ controoler = $300+

z32 afm - $250+

On a r32 this will get u around 160-165rwkw only because the turbo has run out of puff, it does not mean the car cant go futher.

Turbo, depending on your choice! mine would be either a small spec t04e, HKS GT series or the TD06-20G = $800-$3000

Manifold = $1500

Wastegate is up to 2....depending if you choose an internal or external turbo setup but around $500 for a 42mm wastegate.

Dumpipe, $300+ get it made when u get the turbo because once you change manifold systems around & all that the seating of the new new turbo is different to the factory one, as i said why waste money on buying 2 items then doin it right the first time around.

Oil lines etc - $50

Or you can pick up a turbo kit for around $1800+ which is the better buy from my point of view

something around 220-250rwkw on a r32

more on a r33

Hope this give you guys a price range

*note this is without labour*

If i left anything out or said something wrong knock me down by all means

Joe.

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/#findComment-119417
Share on other sites

The amount of power you can get really depends on how much boost you want to screw in to it. This car is my daily driver so it will be kept fairly sedate.

Yeah Joe I fitted an 044 a long time ago, the stock couldnt keep up with just increased boost.

While there is no such thing is cheap performance you can do thing well for a lot less than some spend.

PS- If anyone wants a to make a bid for the complete setup from cooler to exhaust tip i would consider it as im always planning to do someting else.

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/#findComment-119441
Share on other sites

For me it was either a remap, or do the job properly. A power FC has no real advantage over the stock 32 ecu, the only thing i consider running my car on is a Haltech E11, or Motec.

The stock ecu does the job and only really laks some features such as data logging and output controls.

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/#findComment-119462
Share on other sites

Joe that’s a pretty comprehensive list. Even so a lot of those prices would be for used parts bought on the cheap. Try getting a decent fuel pump for $200 :D

Clint for $50 all you would get is a re burn of your eprom. Who knows what kind of maps would be up loaded. You’d have to be a houdini to guess what fuel and spark to punch in for a 230rwkw car without doing any power runs or checking the a/f ratio.

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/#findComment-119780
Share on other sites

Because it was so hot they didnt end up tuning it. Hopefully today.

Joel , i havent hooked up a temp switch for the fans yet as the davies Craig thing would not fit down the radiator hose so they on a switch at the moment, used 2 relays.

I need to find another way to switch them on though, still trying ti find out when that fan infront of the air cond comes on

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/#findComment-119807
Share on other sites

My fan in front of the Aircon hardly ever comes on except for really hot days.

I had the car sitting there on a 35degree day for around 1hr when I had cooling problems and the thing didn't even turn on.

Those twin 2x thermo's pump the air through though.

Link to comment
https://www.sau.com.au/forums/topic/8198-to4e-rb20/#findComment-120381
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...