Jump to content
SAU Community

Recommended Posts

I have used the meguiars wet look polish and their wax, and while its great when its done, it requires FAR more elbow grease than the equivalent AUTOGLYM products.

Now im using AUTOGLYM super resin polish, followed by their super hard coat protectant/gloss. Its awesome stuff and HELL EASY to apply and buff off.

Save your time and effort and try this stuff.

(i use the meguiars foam applicator pads, and their terry cloth buffing towels, they are cool. Dont use an old t-shirt or tea towel!)

Originally posted by inark

how i dry my car...

140 down around the factory areas near my car wash until it is damn near dry....

The best way to do it.... The water streaming across the windshield adds to the star-trek'n boost feel of it all :thumbsup: I live near the airport so it works well for me too.

When I get back home though I've got to wipe the dirt from the back of the skirts at either side (with a dry cloth).:mad:

46n2

  • 4 weeks later...

Well an update on the washing and drying of my car.

I used the Meguiars Gold Class Wash with one of their wash mitts - great, those mitts are heaps better than sponges and the wash seemed to work well.

Then I polished most of the car using Meguiars Deep Crystal polish - recommended - it deepened the colour (red) that was really noticable. It also brought up the colour of the mirrors that are fading. Good stuff.

Then I applied Deep Crystal wax over the top of the polish (after rubbing off the polish of course). This was all based on Meguiars web site on how to do it properly. They recommend to polish first then wax.

I found the Meguiars products much easier to wipe off than say Turtle Wax that's for sure with much better results. I just gotta keep doing it.

Oh and one thing is for sure, in relation to towels and polishing cloths, good quality ones make life a lot easier and you get better results. I had some cheaper polishing cloths that didn't last too long, so used those to get most of the polish/wax off then a Meguiars towel to finish it off.

I too polished my car 2-3wks ago with Meguiars Deep Cystal Polish and it was damn easy with damn good results. All up it took me around an hour and the paint (red) came up like the car was brand new its amazing. Washing is so much easier now with heaps better results.

I also got a new chamois which cost me about $19, 1 wipe of any section now matter how much water is on it and its totally dry, no streaks or water stains etc just perfect.

if u read the back of some of the meguiars stuff it says to have the water streaming across the car......i.e dont use a nozzle. I gave this a try and I found that if I use the nozzle i get lots of beads all over the car...and it takes ages to chamois it dry. But if you stream it over your car the water just rolls off...and you dont have to chamois off very much water.

give it a try people.

I tried with the water streaming after reading the back of the Meguiars stuff and it works, much less water. Dragging the chamois also works too - still can't get used to something wet actually drying !!!!

I also used the Meguiars (yes I have nearly even product of theirs now) foam applicator pads - what a great way to apply polish/wax, so easy and you tend to use less as the foam absorbs some of it so you don't need to keep putting new stuff on all the time.

Meguiars = revelation for Red Sky :lol:

BTW has anyone used Meguiars Deep Crystal paint cleaner or Scratch X? - I want to fix up the roof that looks ugly with lots of marks and rough paint even after washing, polishing and waxing.

Buy the biggest and best synthetic chamios you can buy, that does make a difference. Mine was $40. Its huge and works well.

Another tip if you want your windows to look really clean and clear :

1. Spray windows with Windex.

2. Wipe off with 2 sheets of black n white newspaper per window.

Do the inside of the windows too.

It leaves no streaks at all. Give it a try. You wont be dissapointed.

Cheers

i just used meguiars scratch X and OMG some of my scratches have virtually dissapeard, and I swear by Gold Class liquid wax and shampoo (yes I buy the christmas packs :P)

I think the trick to getting the chamois ready is to always wash it in soapy warm water after every wipe, then run it thru warm water, wring then wipe again... well its what I do, and it works best for me. For soap I just use a bit of Maguiars shampoo (left over from car wash)

Alright guys don't laugh at me.

Tiny bit off topic.

Is is alright to wash the inside of the muffler as i do this at the moment with my 3 inch tips and like the clean look instead of all that sooty crap, also has a nicer note afterwards, but i'm getting a skyline with HKS super drager and want to know if its a no-no due to rust and stuff

Originally posted by Jimbo2000

Alright guys don't laugh at me.

Tiny bit off topic.

Is is alright to wash the inside of the muffler as i do this at the moment with my 3 inch tips and like the clean look instead of all that sooty crap, also has a nicer note afterwards, but i'm getting a skyline with  HKS super drager and want to know if its a no-no due to rust and stuff

You actually notice the difference from cleaning the little bit of soot out of your exhaust tip? You must have a keen eye for detail.

Washing a Super Dragger won't hurt because its made out of stainless-steal. IE: Won't rust. Just don't squirt water inside it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...