Jump to content
SAU Community

Recommended Posts

You have got to be F U C K I N G KIDDING ME..

http://www.prestigemotorsport.com.au/?/au/...sp?StockID=3310

http://www.japanautodirect.com/auto.specsh...heet.cfm?id=468

DOTSTAR

http://raws.dotars.gov.au/raws_online_guide.htm

http://raws.dotars.gov.au/Download/PDF/RAW...uide%20July.pdf

15. Damaged Vehicles

Crash damage or corrosion may affect continued compliance with the ADRs. This is especially so in the case of the occupant protection ADRs 69, 72 and 73. It is not possible for a RAW to provide a reasonable level of assurance that a crash damaged or corroded vehicle, where the structural integrity of the vehicle has been affected, complies with all of the applicable ADRs. Therefore, it is not permissible for a RAW to fit a used import plate to such a vehicle.

Before commencing compliance work each vehicle must be inspected by the RAW to check for crash damage, damage repair or corrosion that may affect the structural integrity of the vehicle. Records of this inspection are to be retained by the RAW and be made available to VSS inspectors upon request. (Regulation 57)

Crash damaged or corroded vehicles where the structural integrity may be affected must be re-exported or destroyed. It is expected that a RAW would take all reasonable steps to avoid importing a crash damaged or corroded vehicle.

The criteria below must be used as a minimum when deciding if crash damage or corrosion is likely to affect the structural integrity of the vehicle.

q Underbody damage which results in the:

Ø crushing of floorpan stiffening members,

Ø splitting of seam welds or

Ø tearing of the metal

q Damage to rocker panels (or outer sill) which result in:

Ø Dents to a depth of more than 25 mm

Ø Creasing, distortion of the sill weld

q Distortion to longitudinal rails affecting the front and rear crush zones.

q Collision damage to steering or suspension components.

q Damage to the vehicle’s outer body panels, which affect the integrity of any of the seams or joints installed by the vehicle manufacturer.

q Corrosion (rust) which has resulted in perforation or flaking of the metal.

When checking the condition of the vehicle the following items need to be inspected but not necessarily in this order:

q Engine compartment

q Right side

q Luggage cargo compartment

q Left side

q Underbody or chassis frame

q Passenger compartment

<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>

By the way this vehicle sold for 1,215,000 at Auction, Do the maths and you can work out what $$$ is been trying to be made out of this. And it wouldn’t surprise me if some commission is exchanged between dealer and broker, a common practice.

Link to comment
https://www.sau.com.au/forums/topic/82299-your-en-kidding-me/
Share on other sites

A= Scratch

U=Pin Dent

B=Dent

W= Wave Mark.

Then 1-3 for severity.

Top right hand corner, R-0-1-5

Grade 5 : As new condition, no dents and scratches. [in other words, in prestigious condition. Usually reserved for cars less than a few years old] Grade 4.5 : Excellent condition, almost no dents and scratches. Grade 4 : Good condition, a few slight dents and scratches needing minor Attention. Grade 3.5 : Fair condition with some dents and scratches requiring repairs. Grade 3 : Average condition with obvious dents and scratches requiring extensive repairs. Grade 2 : Below normal condition. Grade 1 : Bad condition. Grade 0 : Accident car. Grade R : Accident car

Under neath this can be A B C D

This shows the condition of the interior.

A=Perfect

D=SHIT. Like a dog has lived inside the car for 2 years. Ok, reality. Expect interior to be in really bad shape. Cigarette burns on seats, shabby carpet etc

yeah.. would agree thats pretty dodgy car.. which would be knocked back..

I mean anybody with some knowledge, would not even bother .. but somebody trying to save some bucks, or with not knowledge of the import process may easily be taken in with something like that.

Bit disappointing!

as an example - my mate has a quite clean R33 Black GTR Vpsec which will be up forsale soon for about $33k.. This is *not* a dodgy car, and has been in the country for a few years.

I have another example.

Just look around to see who are have displayed this car on there website. Its not difficult. I know of two brokers.

Our main Brokers here have been in this game long enough to know by now the cars that come on Japan Auto Direct are most likely crap. Japan Auto Direct mostly buy the cheapest cars [R grade] which don’t have much of a bidding war on at auction so they get them cheap and then sell with quiet a mark-up for export.

I might not work in this industry but if I have access, to websites, which display auction reports history, I don’t know why our brokers here, don’t do the same to rat out the crap, that is rampant.

Isn’t that what we pay them for? Too look out for us, with the wealth of invaluable knowledge that they have gained through years and years in the industry?

I don’t mean to make it an agenda, I just don’t want to see someone importing a car, then finding out that it has to be crushed or re exported, a complete lost of $$$$ to the client. And then to hear the broker say, “Sorry not much I can do about it when the dealer in Japan failed to past the information onto me.”

Btw the car below was bought for 160,300 at auction. Do the maths!

hmmm interestin.. the car is only worth about 2000 dollars max.. gettin it here another 2000 or so.. So say under 5000 all up, excludin complicance, coz that cant be done coz of the state of the car..

Now what i wanna know is, b4 crushing the car into bits, can you resell most of the parts?? Can make some profit right??

hmmm interestin.. the car is only worth about 2000 dollars max.. gettin it here another 2000 or so.. So say under 5000 all up, excludin complicance, coz that cant be done coz of the state of the car..

Now what i wanna know is, b4 crushing the car into bits, can you resell most of the parts?? Can make some profit right??

maybe you're thinking it works like that, but unfortunately it doesn't... you can't import a whole car for parts anymore apparently..

but it would go for more than $2000 in japan (even for parts maybe), thats the thing. Its just that the rules are now very restrictive here... and ANY structural damage will get the car knocked back (which means it has to be destroyed i am pretty sure, *without* you having any access to it at any stage) Many of our cars on the roads would have worse damage and still driving around, being sold, etc every month.

In Geoff's defence, I don't know how thoroughly he checks what gets sent out to the lists. I imagine a lot of the process of adding stock to his website from constant supplier like JAD is fairly automated.

Here's another suspicious car (well, IMHO):

http://www.prestigemotorsport.com.au/au/st...sp?StockID=3318

Lucien.

It really is bullshit the way they go on, I mean really, you've forked the money out for it, the least the government should allow you to do is salvage what you can. just another case of them "protecting the local car industry". yeah right. more like protecting their party funding. wankers. who do they represent again? the public? oh sorry, forgot.

to ask a stupid question, what exactly am i looking for on that GTR? can someone do like a pic with arrows or something? i mean i see the rust, but it doesn't look that bad to me. wouldn't set alarm bells ringing anyway.

I gotta agree tho there are plenty of cars driving around in australia that have have rear ends and shit welded back on. alot worse than some of the bingles that these cars have seen!

I have another example.

Just look around to see who are have displayed this car on there website. Its not difficult. I know of two brokers.

Our main Brokers here have been in this game long enough to know by now the cars that come on Japan Auto Direct are most likely crap. Japan Auto Direct mostly buy the cheapest cars [R grade] which don’t have much of a bidding war on at auction so they get them cheap and then sell with quiet a mark-up for export.

I might not work in this industry but if I have access, to websites, which display auction reports history, I don’t know why our brokers here, don’t do the same to rat out the crap, that is rampant.

Isn’t that what we pay them for? Too look out for us, with the wealth of invaluable knowledge that they have gained through years and years in the industry?

I don’t mean to make it an agenda, I just don’t want to see someone importing a car, then finding out that it has to be crushed or re exported, a complete lost of $$$$ to the client. And then to hear the broker say, “Sorry not much I can do about it when the dealer in Japan failed to past the information onto me.”

Btw the car below was bought for 160,300 at auction. Do the maths!

heres another 1

34

auction result ...accident car

1998 SKYLINE 2D GT TURBO Manual 5 Speed 43,000km black A

1,138,000YEN

bit disapointing seeing accident cars being promoted after eveyone going thru the whole RAWS/SEVS crap to stop it...nice margin though...y310,000 fob charge

post-7472-1123158074.jpg

Please do that.

:(

There is a new website coming out soon, which will offer great services, to help protect buyers from this crap.

Anton from JAD knows me (well, he might remember me), so its wouldn't work to well without me signing up for some annonymous email account which I CBF'ed doing :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...