Jump to content
SAU Community

Recommended Posts

if your intersted in pics please let me know ..

Nissan Turbo - Steel Front Wheel - Ceramic Rear - Great Condition $300

I was told it was a VG30 ball bearing.. but few things yet to be confirmed what it actually is ..but i'll find out ASAP :confused: :confused: Found out that it is a RB25 Compressor Wheel and Cover - with a VG20 Rear Exhaust wheel and housing .... good for around 210rwkw on a RB20 ... nice upgrade for cheap.... need to sell .... .. with lines 350 i'll pay for postage

vg30_1.jpg

also FMIC 600x300x76 intercooler... slight damage to the mounting points.. but no core damage.....hybrid bar and plate design ... 160 including postage....

cooler1.jpg

http://www.outlawconnection.com/angryaussi...unk/cooler2.jpg

http://www.outlawconnection.com/angryaussi...unk/cooler3.jpg

http://www.outlawconnection.com/angryaussi...unk/cooler4.jpg

RB25 Water and Oil lines ....$50 .. (no banjo bolts)

RB20/25 Exhaust Manifold - Primed in Grey - $60

RB20 Cross Over Pipe.... No BOV version from R31 Redtop $40

RB20 Cross Over Pipe - with Factory BOV - $50

Standard R32 GTR Camshafts - $250

Standard R32 GTR Conrods - $250

Standard R32 Fuel Rail - $50

Standard R33 Yellow GTR Injectors x6 $300 SOLD Pending Payment

Let me know ..pick up prefered.. postage can be arranged for interstaters at there own cost.

email me on [email protected] or PM me

Im located in Hoppers Crossing - Victoria

Thanks

Matt

post-9827-1123030959.jpg

post-9827-1123030980.jpg

post-9827-1123031131.jpg

Link to comment
https://www.sau.com.au/forums/topic/82623-gtr-parts-vg-bb-turbo-rb20-bits/
Share on other sites

pics added of fuel rail and injectors... i'll get around to taking pics of the rest of the stuff shortly

injectors are in good condition i bought them over 12months ago ..and i my project has pretty much not eventuated.. 17year old car with 17year old hereit problems to fix.

anyways far as i can tell the "squirting" pentils of the injectors are clear of any junk or build up ..so they pretty clean... i was going to get them cleaned when i needed them for my redtop rb20 ..but project plans have changed.

thanks

Matt

if your intersted in pics please let me know ..

Nissan Turbo - Steel Front Wheel  - Ceramic Rear  - Great Condition $300

I was told it was a VG30 ball bearing.. but few things yet to be confirmed what it actually is ..but i'll find out ASAP :confused:  :confused: Found out that it is a RB25 Compressor Wheel and Cover - with a VG20 Rear Exhaust wheel and housing .... good for around 210rwkw on a RB20 ... nice upgrade for cheap.... need to sell .... .. with lines 350 i'll pay for postage

vg30_1.jpg

also FMIC 600x300x76 intercooler... slight damage to the mounting points.. but no core damage.....hybrid bar and plate design ... 160 including postage....

That doesn't look like an rb25 compressor, more like an rb20 but not.

cooler1.jpg

http://www.outlawconnection.com/angryaussi...unk/cooler2.jpg

http://www.outlawconnection.com/angryaussi...unk/cooler3.jpg

http://www.outlawconnection.com/angryaussi...unk/cooler4.jpg

RB25 Water and Oil lines ....$50 .. (no banjo bolts)

RB20/25 Exhaust Manifold - Primed in Grey - $60

RB20 Cross Over Pipe.... No BOV version from R31 Redtop $40

RB20 Cross Over Pipe - with Factory BOV  - $50

Standard R32 GTR Camshafts - $250

Standard R32 GTR Conrods - $250

Standard R32 Fuel Rail - $50

Standard R33 Yellow GTR Injectors x6 $300

 

Let me know ..pick up prefered.. postage can be arranged for interstaters at there own cost.

email me on [email protected] or PM me

Im located in Hoppers Crossing - Victoria

Thanks

Matt

bump

thanks for that completely pointless post .."booster"

have more pics if anyone interested wants to see

http://www.outlawconnection.com/angryaussi.../r31/vg30_2.jpg

http://www.outlawconnection.com/angryaussi.../r31/vg30_3.jpg

its much the same as the turbo that Waldo is selling currently on the forum, same exhaust housing just not painted red. ;)

Comes with Std Dump Pipe and O2Sensor.

Purchased from JustJap earlier this year - told VG30DET Single turbo - Ball Bearing Center - Ceramic Exh wheel- Steel Compressor... unsure wheither its one or the other... either way its bigger than a RB20 standard.

Matt

post-9827-1123377432.jpg

post-9827-1123377646.jpg

bump

thanks for that completely pointless post .."booster"

have more pics if anyone interested wants to see

http://www.outlawconnection.com/angryaussi.../r31/vg30_2.jpg

http://www.outlawconnection.com/angryaussi.../r31/vg30_3.jpg

its much the same as the turbo that Waldo is selling currently on the forum, same exhaust housing just not painted red. ;)

Comes with Std  Dump Pipe and O2Sensor.

Purchased from JustJap earlier this year - told VG30DET Single turbo - Ball Bearing Center - Ceramic Exh wheel- Steel Compressor... unsure wheither its one or the other... either way its bigger than a RB20 standard.

Matt

Not pointless

In your first post you said a few things are yet to be confirmed.

I'm just offering an informed 2nd opinion for what it's worth.

It is not an rb25 (45V) compressor housing and it is not rb20 but shares the 16V compressor housing so i suspect it came from another 2L motor like the vg20.

Rude pms are not necessary

my apologies... but its not a VG20 turbo .. its too big... simple as that... Cef11E had this same style of turbo on he';s RB20 Cefiro ..

casting marks are the same as what waldo is selling ...04U on the snail

Vg20 turbos did not have 16v 10 on there turbo comp covers.... they are much older than that ....

one that ive seen has 16v 7

Matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...