Jump to content
SAU Community

Recommended Posts

Well I put in my new ground cable. It's bigger than the old but I can't take a picture because the digicam is out and about somewhere.

Coincidentally my car now has a crazy bad idle - drops to 800rpm from 1000rpm, when my fan goes on, when I use my power window my lights dim. I think it's unrelated (I suspect my head gasket gone).

Ahh always something :\

re Alternators:

from memory:

if the volts in battery drops then the alternator ups the volts to get battery upto right level i.e. should be charging between 13- 14.4V, if current isnt amps aren't right then it drops the volts and puts more amps into the battery. i.e. you can have a battery showing 12v but it has no guts as it can't put out the amps.

This probably explains why the alternator is putting out 14~v when car is cold, because the battery has just been drained from starting the car, and because cold temps load the battery more.

  • 4 weeks later...

Erm. Why do you need a group buy? Go down to Jaycar and buy 8G or 4G power cable and away you go?!

Either that, or buy an HKS/NISMO/RICER ground kit and waste your money and prove you're just a consumer whore?

:P

Edited by MarkE
Does anyone know exactly where the earths are on an R32 GTR? I know there's battery / chassis and engine / chassis but I think there are other major ones also.

The other 2 main ones I can think of are from the chasis to front and rear subframes. But the main one like you said is battery, chassis, block/engine mount

Erm. Why do you need a group buy?  Go down to Jaycar and buy 8G or 4G power cable and away you go?!

Either that, or buy an HKS/NISMO/RICER ground kit and waste your money and prove you're just a consumer whore?

;)

Even Jaycar's cable is a bit exy, when i was living in Melb i went to a cabling specialist (in Moorabin), paid about half what Jaycar wanted for 4G stuff.
Even Jaycar's cable is a bit exy, when i was living in Melb i went to a cabling specialist (in Moorabin), paid about half what Jaycar wanted for 4G stuff.

Cigweld has amazing quality welders lead for cheaper then Jaycar also. Its very soft and flexable, heaps of sizes. Dont go in asking for X guage, say what you want in mm^2, we arent american.

Yeah Jaycar cable is very expensive. Their margins are very high. If you complain and tell them that, and ask them to do a better price, I've found they will. Hornsby and St Leonards stores have always treated me well.

  • 4 weeks later...

Hey all, now that these earthing kits are now $50 delivered, (including 5 cables) do they represent good value?

My idle seems to drop a fair bit when i turn the lights on and when winding windows up and down, if i can get all the bits and pieces i need for $50 at my door, ill do something about it.

Otherwise i'll just live with it! (as im really slack eg. had my Jaycar IEBC and DFA kits completed for 4 months and still havent put them in my car. Probably could have paid for them over with the fuel i would have saved.)

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...