Jump to content
SAU Community

Recommended Posts

  • Replies 98
  • Created
  • Last Reply

Top Posters In This Topic

The story is in my signature! The one year anniversary of my M Coupe being taken off the road for modifications is next Thursday 25th August. Same night I got booted from WSID after running a ten second pass.

Your signature doesn't really tell a story though, is it near finished or is it still 6 months off?

Your signature doesn't really tell a story though, is it near finished or is it still 6 months off?

Almost With You (The Church)

See the chains which bind the men

Can you taste their lonely arrogance

It's always too late

And your face is so cold

They struggled for this opulence

See the suns which blind the men

Burnt away so long before our time

Now their warmth is forgotten and gone

Pretty maids not far behind

Who you trying to get in touch with

I'm almost with you

I can sense it wait for me

I'm almost with you

Is this the taste of victory

I'm almost with you

See the dust which fills your sleep

Does it always feel this chill near the end

I never dreamed we'd meet here once more

This life reserved for a friend.

  • 4 weeks later...

Are 12's the new 13's???

I reckon it depends if the cars running 12's with slicks or not. On street tyres i think 12's are quick for a street car, definately if its RWD. About 3 years ago i had a VL that ran 13's and all my mates thought that was pretty quick...not anymore. Now there seems to be quite a few cars that run 12's, even high 11's when you go to the drags.

With the times that (new) performance standard cars are running nowadays i dont think it'll be to far down the track that 11's will become the norm...

Hi guys... I still think that 12s are quick. I drive a car that is not supposed to be quick (Datsun 120y). I think people expect certain cars to be fast (skylines etc). Its very common to see street cars doing 12.8 - 13.9 times and most are done on street tyres as well. Back in 2001 my mazda 626 fwd was doing 13.5 @ 108. B)

As technology betters so does our drag/lap times. I want 11s on street tyres so the RB20 in the garage is being forced into the engine bay now. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...