Jump to content
SAU Community

Recommended Posts

All parts are from my 32GTR. Selling due to upgrade.

Motor has been stripped, some parts from that are for sale now also,

* Standard Rods - $150

* Standard Cams - $150/pair

* Standard Oil Pump - $100

* Standard Harmonic Balancer - $50

* Standard Cam Wheels - $50 pair

* N1 Water Pump - $200***SOLD***

* Nismo Timing Belt, done bout 15,000kms gc - $30

* Sard Fuel Pressure Reg, Excellent street upgrade - $200

* Standard gtst drivers seat - needs recovering $30

* Momo steering wheel $150

* Standard 32 GTR ecu $200

* 1x Standard GTR Turbo with all fittings, great condition $400

* 1x Standard GTR Turbo, blown, no exhaust wheel $50

* Standard dump pipes $20

* Standard exhaust manifolds $50

* Rego Plates - OOR032, as seen in pic below $400 will upgrade to sell....

* HKS FCON computer. Has harness to plug into factory computer and factory loom. Full piggy back with no hard wiring in.

From what i've been told if your in Brisbane, Matt Spry from PITS on the Gold Coast can tune these, and if in Sydney, i would assume BD4's should be able to tune it seeing as they are the HKS distributor.

Pics of this to be posted shortly. $500

I need to sell parts a.s.a.p so all prices are negotiable. Located in Brisbane. Shipping at buyers expense and I will arrange for buyers. Pics to come shortly or as required. PM me if needed.

Cheers

Mike

post-22000-1124005058.jpg

post-22000-1127529293.jpg

post-22000-1137894856.jpg

Edited by dahandfull
Link to comment
https://www.sau.com.au/forums/topic/83188-gtr-parts/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Tbee - not selling the standard in dash speedo cluster.

dd4321 - Yes the one thats din mounted. And yes it will fit gtst. What is displays is Boost, oil temp and battery volts....

Chrisman - from memory it doesn't. the only tag i remember is a seriel number, but i'll check tomorrow for you

Link to comment
https://www.sau.com.au/forums/topic/83188-gtr-parts/#findComment-1515754
Share on other sites

Injectors, harness, gauge cluster all sold.......

Zenith - i would like to sell the whole lot together because I have no use for any of the standard passenger seating (cage and race seats fitted).....

Link to comment
https://www.sau.com.au/forums/topic/83188-gtr-parts/#findComment-1518727
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
×
×
  • Create New...