Jump to content
SAU Community

Power Fc Boost Control Kit

HypeR33

By HypeR33,
in Engines & Forced Induction

 Share

Recommended Posts

HypeR33 Mentor

HypeR33

Posted
Posted

Hi guys,

Can anyone tell me if there is an advantage of using the AVC-R over the pfc bost control kit? I tried doing a search on this but it kept coming back with errors.

I was going to get the AVC-R, but dont know if there is any advantage in getting it, as it costs more than getting the boost kit for the pfc

Thanks for your help.

Link to comment
https://www.sau.com.au/forums/topic/83783-power-fc-boost-control-kit/
Share on other sites
HypeR33 Mentor

HypeR33

Posted
  • Author
Posted
It uses the same boost control solenoid as the AVCR. I have the PFC boost kit and no problems with it.

is there anything that the avc-r can do that the pfc cant? apart from having a 1/2 din blue screen in your dash? :P

HypeR33 Mentor

HypeR33

Posted
  • Author
Posted
avcr has gear based boost control

avcr has rpm based boost control

whether those things are worth 200$ more or up to you

oh ok...the gear based boost control might be worth it. Being able to limit boost in the lower gears would be quite useful. Seeing as there is a heap of money going into making the power, $200 will be worth it to help limit wheel spin in 1st and 2nd gears :P

Cheers for that :)

HypeR33 Mentor

HypeR33

Posted
  • Author
Posted

thanks for the link ;)

I just tried to search again and got the same error:

Sorry, an error occurred. If you are unsure on how to use a feature, or don't know why you got this error message, try looking through the help files for more information.

The error returned was:

One or all of your search keywords were below 4 characters or you are searched for words which are not allowed, such as 'html', 'img', etc, please go back and increase the length of these search keywords or choose different keywords.

oh...i think I get it now. I guess it cant handle fc in the search criteria :P

Bass Junky Grand Master

Bass Junky

Posted
Posted

I have the PFC boost control kit and it controls boost very accurately.

However, with the plan of a bigger turbo in the pipeline, I would probably have gone with the AVC-R so that I can limit boost in lower gears.

And although some people will say that I can limit boost with my right foot, and I've said it myself as well, it would still be VERY handy to be able to have control over the boost characteristics of the engine.

If anyone has an R34 and wants the PFC boost kit, I'll swap for an AVC-R. Cash adjustment of course.

HypeR33 Mentor

HypeR33

Posted
  • Author
Posted
However, with the plan of a bigger turbo in the pipeline, I would probably have gone with the AVC-R so that I can limit boost in lower gears.

Hey Bass, thats what I thought too. Being able to control boost in 1st & 2nd especially. I am looking at getting to 300rwkw so prefer something that will electronically control the boost.

I know I wont be able to trust my right boot :)

HypeR33 Mentor

HypeR33

Posted
  • Author
Posted
PS  Love the white writing on your tyres by the way,  very RACE!

Thanks man ;)

Takes a lot of time colouring in the writing with a paint pen :) In the photo I only did half on each tyre. Started getting too dark.

Sydneykid Grand Master

Sydneykid

Posted
Posted
I'm sure if you were trying to reduce wheel spin in a certain situation and had the ability to do it electronically, you would.

I know I would.

Lower boost in 1st and 2nd gear is simplistic at best. Let me see if I have it right;

You run 1.5 bar in 3rd, 4th and 5th

But say 1.2 bar in 1st and 2nd

That way you will get less wheelspin in 1st and 2nd :D

But what if it is a nice warm day and the road is clean and it will handle 1.3 bar?

But what if it is raining and 0.8 bar is needed for less wheeelspin?

But what about if the road is sorta clean and has only a few bumps, so 1.25 bar would be good,

But what about if the road is a bit bumpy, and the tyres are getting old, and 1.15 bar is the go.

Do you limit the 1st and 2nd gear boost to 1.15, 1.2, 1.25 or 1.3 bar? <_<

What you need is traction control, not lower boost. And the best traction control is your right foot.

:) cheers :angry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...