Jump to content
SAU Community

Power Fc Boost Control Kit

HypeR33

By HypeR33,
in Engines & Forced Induction

 Share

Recommended Posts

HypeR33 Mentor

HypeR33

Posted
Posted

Hi guys,

Can anyone tell me if there is an advantage of using the AVC-R over the pfc bost control kit? I tried doing a search on this but it kept coming back with errors.

I was going to get the AVC-R, but dont know if there is any advantage in getting it, as it costs more than getting the boost kit for the pfc

Thanks for your help.

Link to comment
https://www.sau.com.au/forums/topic/83783-power-fc-boost-control-kit/
Share on other sites
HypeR33 Mentor

HypeR33

Posted
  • Author
Posted
It uses the same boost control solenoid as the AVCR. I have the PFC boost kit and no problems with it.

is there anything that the avc-r can do that the pfc cant? apart from having a 1/2 din blue screen in your dash? :P

HypeR33 Mentor

HypeR33

Posted
  • Author
Posted
avcr has gear based boost control

avcr has rpm based boost control

whether those things are worth 200$ more or up to you

oh ok...the gear based boost control might be worth it. Being able to limit boost in the lower gears would be quite useful. Seeing as there is a heap of money going into making the power, $200 will be worth it to help limit wheel spin in 1st and 2nd gears :P

Cheers for that :)

HypeR33 Mentor

HypeR33

Posted
  • Author
Posted

thanks for the link ;)

I just tried to search again and got the same error:

Sorry, an error occurred. If you are unsure on how to use a feature, or don't know why you got this error message, try looking through the help files for more information.

The error returned was:

One or all of your search keywords were below 4 characters or you are searched for words which are not allowed, such as 'html', 'img', etc, please go back and increase the length of these search keywords or choose different keywords.

oh...i think I get it now. I guess it cant handle fc in the search criteria :P

Bass Junky Grand Master

Bass Junky

Posted
Posted

I have the PFC boost control kit and it controls boost very accurately.

However, with the plan of a bigger turbo in the pipeline, I would probably have gone with the AVC-R so that I can limit boost in lower gears.

And although some people will say that I can limit boost with my right foot, and I've said it myself as well, it would still be VERY handy to be able to have control over the boost characteristics of the engine.

If anyone has an R34 and wants the PFC boost kit, I'll swap for an AVC-R. Cash adjustment of course.

HypeR33 Mentor

HypeR33

Posted
  • Author
Posted
However, with the plan of a bigger turbo in the pipeline, I would probably have gone with the AVC-R so that I can limit boost in lower gears.

Hey Bass, thats what I thought too. Being able to control boost in 1st & 2nd especially. I am looking at getting to 300rwkw so prefer something that will electronically control the boost.

I know I wont be able to trust my right boot :)

HypeR33 Mentor

HypeR33

Posted
  • Author
Posted
PS  Love the white writing on your tyres by the way,  very RACE!

Thanks man ;)

Takes a lot of time colouring in the writing with a paint pen :) In the photo I only did half on each tyre. Started getting too dark.

Sydneykid Grand Master

Sydneykid

Posted
Posted
I'm sure if you were trying to reduce wheel spin in a certain situation and had the ability to do it electronically, you would.

I know I would.

Lower boost in 1st and 2nd gear is simplistic at best. Let me see if I have it right;

You run 1.5 bar in 3rd, 4th and 5th

But say 1.2 bar in 1st and 2nd

That way you will get less wheelspin in 1st and 2nd :D

But what if it is a nice warm day and the road is clean and it will handle 1.3 bar?

But what if it is raining and 0.8 bar is needed for less wheeelspin?

But what about if the road is sorta clean and has only a few bumps, so 1.25 bar would be good,

But what about if the road is a bit bumpy, and the tyres are getting old, and 1.15 bar is the go.

Do you limit the 1st and 2nd gear boost to 1.15, 1.2, 1.25 or 1.3 bar? <_<

What you need is traction control, not lower boost. And the best traction control is your right foot.

:) cheers :angry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...