Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

gtst25,

one thing i didnt get in my kit, either that or its not meant to be included, was a gasket of any kind for the exhaust turbine housing/dump pipe flange? there is a groove in the exhaust housing so we made up some copper wire to fit exactly as pictured... it probably doesnt need anything, but i didnt want to have to pull it off again incase there was a leak.

christmas2004048.jpg

Edited by SLY33
gtst25,

one thing i didnt get in my kit, either that or its not meant to be included, was a gasket of any kind for the exhaust turbine housing/dump pipe flange?  there is a groove in the exhaust housing so we made up some copper wire to fit exactly as pictured...  it probably doesnt need anything, but i didnt want to have to pull it off again incase there was a leak.

christmas2004048.jpg

No gasket in my kit either. The copper wire looks good though - would squash down nicely and heat wouldn't bother it. What does everyone else do?

I'll get dad to take some more photos of the turbine wheel bare and some measurements.

post-12959-1124295158.jpg

Thank you very much great feed back . Pics of the turbine end on and from the side would be great .

While I'm here the numbers on the ID plate would be interesting , my list shows the cartridge or CHRA number as 700177-0003 for th 84 trim turbine and 56 trim compressor . The turbine should merasure 51.6 by 56.6mm (84T) and 53.6 by 56.6mm for 90 trim .

A couple of things to note , HUGE vent for the waste gate (2835) and the model specific outlet flange pattern on the HKS 2530 to suit the RB20/25 dump pipe .

The thing I'm really curious to know is if the HKS GT3037 Pro S has a divider between the turbine outlet and the waste gate vent hole as the turbine outlet is larger again and there's not much meat with the 2835 housing .

Cheers and thanks A .

The thing I'm really curious to know is if the HKS GT3037 Pro S has a divider between the turbine outlet and the waste gate vent hole as the turbine outlet is larger again and there's not much meat with the 2835 housing .

Cheers and thanks  A .

3037ProS is an external gate only isnt it?

It'd have to have a divider between the turbine exit and wastegate - hell if it didn't you wouldn't have to bother with a split dump pipe - the gasses'd be mixing before they get there. Maybe they can move the wastegate over a bit away from the turbine but if they did that it'd still be a big job to get the housing looking right??

How much larger is the 3037 than the 2835?

hey sly33, has the problem been solved about the gt2835 pro s when it is boosted to 20psi then drops down to 18psi....?

ive noticed a few people saying thats when it boost's to 20 or above it always drops down to 17-18 , i was wondering if it had anything to do with the internal wastegate...?

Thank you very much great feed back . Pics of the turbine end on and from the side would be great .

While I'm here the numbers on the ID plate would be interesting , my list shows the cartridge or CHRA number as 700177-0003 for th 84 trim turbine and 56 trim compressor . The turbine should merasure 51.6 by 56.6mm (84T) and 53.6 by 56.6mm for 90 trim .

A couple of things to note , HUGE vent for the waste gate (2835) and the model specific outlet flange pattern on the HKS 2530 to suit the RB20/25 dump pipe .

The thing I'm really curious to know is if the HKS GT3037 Pro S has a divider between the turbine outlet and the waste gate vent hole as the turbine outlet is larger again and there's not much meat with the 2835 housing .

Cheers and thanks  A .

ID plate numbers:

IA 0156J

GT2835-56T

100177-5003

Turbine dia: 51.17mm top, 56.5 bottom

wastegate dia 35mm

inlet compressor 100mm

outlet compressor 50mm

It's amasing how small the thing is - it must spin like crazy. The turbos on the boat I work on spin @ 56000 rpm - 2070KW per engine. That's nearly 1000 times a second - pretty hard to imagine hey?

post-12959-1124435019.jpg

post-12959-1124435652.jpg

post-12959-1124435778.jpg

post-12959-1124435961.jpg

post-12959-1124436103.jpg

Edited by gtst25

The inside of the turbine housing?

Does it have daggy cast marks etc or does it look as if its been cleaned up or possibly really good castings?

I've seen garret items that look pretty messy inside. Bolts poking through in to the comps airflow stream etc.

Edited by Cubes
The inside of the turbine housing?

Does it have daggy cast marks etc or does it look as if its been cleaned up or possibly really good castings?

I've seen garret items that look pretty messy inside. Bolts poking through in to the comps airflow stream etc.

I'll get dad to have a look when it comes back from ceamic coating.

I don't think he wants to take the compressor cover off - if he dropped or bumped the wheel the wrong way my new turbo would probably go out of balance.

It's amasing how small the thing is - it must spin like crazy. The turbos on the boat I work on spin @ 56000 rpm - 2070KW per engine. That's nearly 1000 times a second - pretty hard to imagine hey?

probably upwards of 120,000rpm.

more to the tune of 150,000rpm+

probably upwards of 120,000rpm.

more to the tune of 150,000rpm+

I see the Bandag bullet's turbos goto 180000rpm.

On our MTU's we've got turbo rev counters - must have a magnetised part of the compressor wheel and a sensor bolts into the compressor housing. They run 3.6 bar boost press @ full noise.

hey sly33, has the problem been solved about the gt2835 pro s when it is boosted to 20psi then drops down to 18psi....?

ive noticed a few people saying thats when it boost's to 20 or above it always drops down to 17-18 , i was wondering if it had anything to do with the internal wastegate...?

Mario dont tell me your getting this turbo ?? haha

Heard you were going for some Apexi item ????

Mario dont tell me your getting this turbo ?? haha

Heard you were going for some Apexi item ????

hahah im just intrested thats all ... i was just wondering why it does it ..i was reading from grepin posts with this turbo......yes im going apexi high mount see what happens .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...