Jump to content
SAU Community

Recommended Posts

hey

I went to a rim shop today to get a quote on the Lenso D1R rims

from previous post few pages back I was going to go with

front 18x9+32

rear 18x9.5+30

however they no longer make the 9.5's

which means id have to go with a 10inch for the rear to get flush

I'm hoping they still make the 18x10+36 as outer position like Alex said will be the same from the outside

but being a 10inch rim will it fit with no other modifications, I currently have coilovers (only wound down about 2cm all round so cars not low low just a nice height atm

also for tyre choice I'm thinking of going with ku36 245/35/18 front and 265/35/18 rear (as they don't make the 255 in the ku36)

what do you guys rkn about the tyre size choice? and if anyone can give some advice on the 10Inch rear rim would be greatly appreciated

Thanks Jason -PS I am going to go back tomorrow to find out for sure they make it in the 10+36

or what kinda work will i be lookin at to get 9 +15 on the rear....keeping in mind i dont want to run camber

yeah 265 is fairly big, but if i were to go with the 18x10+36 id need that cos dont wanna stretch the tyre and ku36 dont come in 255 unfortunatly, alternativly i can get ku31 and run 255 which should be fine aswell on a 10" rim, just thought 245 be a bit to small...

if 9.5+30 is flush wouldnt that mean the 9+15 will stick out of guards 9mm?

yeh but with natural camber of been low or some camber arms you can pull it back in its not really that much like 9mm.

245 isnt that stretched on a 10 it fits quite well actually, a 235 is fair stretched or lower.

fair point, i got a bit of natural camber atm with my coilovers just been fitted but gettin adjustable camber arms to fix that, as a daily drive i dont want camber wear on the tyres...if it wasnt a daily i wouldnt care that much.

but true 9mm isnt allot but cos i aint gonna run camber to tuck it in rules out that size rim for the rear

lets just hope they make the 10+36 which is pretty much flush hopefully it wont hit anything behind the wheel for being too wide and just wrap it in 245s or 255s , because the wheel arc is goin to sit above the wheel so dont think rolling the guards or flareing should be an issue...or will it?

not to worry went back to the rim place cant get them sizes, looks like ill just go with the 9+32 all round which should only stick in 8mm which isnt that bad its pretty much almost flush

but thanks to everyone who helped me

go the 265's.

iv got 265's on my 18x9.5's and they are only just 'flush witht he rims'. So on a 10 inch rim they will me starting to go towards stretched, let along a 245 etc.

Im actually about to throw a 275 on as a replacement this weekend. Ill let you know how that goes on a 9.5..

thanks for the reply guys but the offset for a 10inch cant get to fit my car, so im getting

front 18x9+32

rear 18x9+32

i want to get kumho ku36 they come in 235, 245 and 265 they dont make the 255

what would my better option be 245 front and 265 rear?

go for some staggered fitment.

common staggered fitment is 8s n 9's or 8.5 n 9.5

iv got the latter with 235 n 275. Loves it and the handling is epic with a little lower, little stiffer (8kg-F, 6kg-R) little camber n adjustable damper. Put the power down real nice with 225kwatw...

Just about to buy set of new Lenso D1R rims for my 32GTR

I don't like stretched tyres on rims so looking for right size rims to sit flush with guards without any part of tyres or rims poking out so thought i'd ask you guys your opinions

I can get these 2 sizes which i think would be right for a 32GTR

18x9 +15

18x10 +22

Would the 10" rims fit both front and rear on these cars without poking out?

Now in saying this i don't like the look of stretched tyres either so i would need something around 265 or bigger right?

Don't mind running staggered fitment either as long as all fits under guards

Any help appreciated as want to get it right first time

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...