Jump to content
SAU Community

Recommended Posts

hey

I went to a rim shop today to get a quote on the Lenso D1R rims

from previous post few pages back I was going to go with

front 18x9+32

rear 18x9.5+30

however they no longer make the 9.5's

which means id have to go with a 10inch for the rear to get flush

I'm hoping they still make the 18x10+36 as outer position like Alex said will be the same from the outside

but being a 10inch rim will it fit with no other modifications, I currently have coilovers (only wound down about 2cm all round so cars not low low just a nice height atm

also for tyre choice I'm thinking of going with ku36 245/35/18 front and 265/35/18 rear (as they don't make the 255 in the ku36)

what do you guys rkn about the tyre size choice? and if anyone can give some advice on the 10Inch rear rim would be greatly appreciated

Thanks Jason -PS I am going to go back tomorrow to find out for sure they make it in the 10+36

or what kinda work will i be lookin at to get 9 +15 on the rear....keeping in mind i dont want to run camber

yeah 265 is fairly big, but if i were to go with the 18x10+36 id need that cos dont wanna stretch the tyre and ku36 dont come in 255 unfortunatly, alternativly i can get ku31 and run 255 which should be fine aswell on a 10" rim, just thought 245 be a bit to small...

if 9.5+30 is flush wouldnt that mean the 9+15 will stick out of guards 9mm?

yeh but with natural camber of been low or some camber arms you can pull it back in its not really that much like 9mm.

245 isnt that stretched on a 10 it fits quite well actually, a 235 is fair stretched or lower.

fair point, i got a bit of natural camber atm with my coilovers just been fitted but gettin adjustable camber arms to fix that, as a daily drive i dont want camber wear on the tyres...if it wasnt a daily i wouldnt care that much.

but true 9mm isnt allot but cos i aint gonna run camber to tuck it in rules out that size rim for the rear

lets just hope they make the 10+36 which is pretty much flush hopefully it wont hit anything behind the wheel for being too wide and just wrap it in 245s or 255s , because the wheel arc is goin to sit above the wheel so dont think rolling the guards or flareing should be an issue...or will it?

not to worry went back to the rim place cant get them sizes, looks like ill just go with the 9+32 all round which should only stick in 8mm which isnt that bad its pretty much almost flush

but thanks to everyone who helped me

go the 265's.

iv got 265's on my 18x9.5's and they are only just 'flush witht he rims'. So on a 10 inch rim they will me starting to go towards stretched, let along a 245 etc.

Im actually about to throw a 275 on as a replacement this weekend. Ill let you know how that goes on a 9.5..

thanks for the reply guys but the offset for a 10inch cant get to fit my car, so im getting

front 18x9+32

rear 18x9+32

i want to get kumho ku36 they come in 235, 245 and 265 they dont make the 255

what would my better option be 245 front and 265 rear?

go for some staggered fitment.

common staggered fitment is 8s n 9's or 8.5 n 9.5

iv got the latter with 235 n 275. Loves it and the handling is epic with a little lower, little stiffer (8kg-F, 6kg-R) little camber n adjustable damper. Put the power down real nice with 225kwatw...

Just about to buy set of new Lenso D1R rims for my 32GTR

I don't like stretched tyres on rims so looking for right size rims to sit flush with guards without any part of tyres or rims poking out so thought i'd ask you guys your opinions

I can get these 2 sizes which i think would be right for a 32GTR

18x9 +15

18x10 +22

Would the 10" rims fit both front and rear on these cars without poking out?

Now in saying this i don't like the look of stretched tyres either so i would need something around 265 or bigger right?

Don't mind running staggered fitment either as long as all fits under guards

Any help appreciated as want to get it right first time

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...