Jump to content
SAU Community

Recommended Posts

Ive currently got a R32 GTR with the standard ceramic turbos and want to boost up to about 1.2 BAR but at that level id say they will die.

Would some standard R34 turbos do the job ?

I havent got that much to spend but would R34 turbos @ 1.2BAR and a power FC get some good power ? 260rwkw ?

Also i dont think i would need to upgrade the fuel system which will save some $$.

Whats everyone think ? I can get the turbos for about $1500.

Link to comment
https://www.sau.com.au/forums/topic/84460-upgrading-to-steel-turbos/
Share on other sites

well on an R34 gtr with stock turbo's, PFC, cat back and that sort of boost, I think it was in speed where it was shown to make 290rwkw or something.

so expecting 260rwkw on an R32 might be ok.

in another thread someone mentioned their R34 GTR with stock turbo's was making 0.9Bar at 3000rpm.

WRXHOON I think it was.

The Standard GTR34 turbos will do it, but take note that after being removed and refitted it increases the likelihood of the turbines failing. I fitted a set to a GTS25t and 2km into the first drive at 5psi the front one let go, wrecking the front 3 cylinders. To what extend I don't know yet as I still have to pull it down but compression is 25psi on the front 3 cylinders.

I have steel wheeled stockers on the GTR and they produce 260rwkw at 1 bar.

Ive currently got a R32 GTR with the standard ceramic turbos and want to boost up to about 1.2 BAR but at that level id say they will die.

Would some standard R34 turbos do the job ?

I havent got that much to spend but would R34 turbos @ 1.2BAR and a power FC get some good power ? 260rwkw ?

Also i dont think i would need to upgrade the fuel system which will save some $$.

Whats everyone think ? I can get the turbos for about $1500.

gtr r34 turbos still fail as they are ceramic still i just finished rebuilding one from that very problem

Save a few more dollar ~$2500 and buy a set of gt2560r 707160-5 off racespec you will not regret it. An exact $1000 now is cheaper than a $6000 rebuild down the road.

pete

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...