Jump to content
SAU Community

Recommended Posts

For those that have R32 GTRs what is the maintainence like on them? I would really like to get one, but the age of them worries me.

I am guessing that engine wise the biggest problem is likley to be the turbos... But a few thoughts from those that currently have one would be really helpfull.

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/
Share on other sites

For those that have R32 GTRs what is the maintainence like on them?  I would really like to get one, but the age of them worries me. 

I am guessing that engine wise the biggest problem is likley to be the turbos...  But a few thoughts from those that currently have one would be really helpfull.

I dont have one (gtst 33) but from what i have read on here is that only really have to look out for is the oil pump shitting its self and you spinn a big end

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1532080
Share on other sites

I've had mine since September last year.... the previous owner had the engine rebuilt with forgies(gotta get it rebuilt and done properly myself anyway), turbos hi-flowed, replaced the oil pump, and added a baffle oil sump....so..... since I've had it I've had to replace to the coil packs and get my alternator reconditioned.

Apart from the coil packs and alternator she's been sweet...

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1532439
Share on other sites

it's almost impossible to answer that because it depends so much on the condition of the car. get a bad one and it will make you pay until you squeal, get a good one and it will cost you normal servicing only. but it's just like buying a porsche - maintaining something that will give you this much performance is never going to be cheap eg yes you can use $15 oil from Woolies but most of us use full synth $60 or so every 5000km. it adds up.

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1535742
Share on other sites

i'm just waiting for nick to pipe up. :)

he told me not to buy a gtr. did anyway. i resent the PITA that they can be but the experiences you'll have in it FAR FAR FAR outweigh any $$$ outlay you might experience.

having said that, i got lucky with mine. its an 89 and i've had very few problems with it. anything that has reared its ugly head has been quite minor.

keep in mind that even the best 32's will most likely need some sort of work before too long. its the kind of car you really need to be dedicated to, otherwise you'll just end up with a car that is falling to pieces! preventative maintainance is the key to these cars.

if i could go back before i bought my gtr with the knowledge of the things that i have gleaned during my ownership, i'd spend more on the initial purchase and buy one that was in a higher state of tune. that is all. other than that, its been a great purchase!

so yeah, if the pockets allow, nab yourself one and enjoy what is, really REALLY, one of the best cars in the world and one of the most rewarding drives you'll experience.

oh. and my car's for sale too if you want it!!! ;) going o/s end of the year, and downgrading until my return. then i'll park another R in my driveway.

http://www.skylinesaustralia.com/forums/in...showtopic=84594

d

Edited by djhatton
Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1548744
Share on other sites

ive only really had diff troubles with mine. The day after it got licenced the diff dropped a bearing and grinded and grinded. Replaced it with a 2nd hand unit which looked good and the lsd is worn in it so again i need to either fix it or look for an aftermarket unit.

Umm what else.. my air con has decided to only point to the window, motor wont move the vents.

Brakes are very spongy, replaced master cylinder and it didnt fix it so its either worn/old brake lines or the brake booster.

i think thats it :|

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1549539
Share on other sites

  • 2 weeks later...

oil's (motor, gearbox, diff' (s), auto trans) air filter, fluids (brake, coolant, clutch master) sparkies, coils (not that you can do anything except glue them dont ask) wheel bearings all of this you can do your self

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1570363
Share on other sites

Hey djhatton it's Pat here from Duratone :)...

Yeh I pretty much have the same questions but replace GT-R with GTS-T....can't afford too much in maintenance.

haha hi mate

so you're in the market for a gtst. good choice.

gtst's are much simpler beasts (i used to own one) and you shouldn't have too many problems really. just the usual sh1t. of course, its all relative and the driving experience of a gtst is hugely different to an r.

no doubt you'll find every problem you're likely to come across EVER posted among these very forum pages so have a snoop around. search is your friend. i was a member on here for like 8 months before i posted. i spent that time reading and reading and reading the backlog that exists. lots of info here.

i'm not surprised you can't afford the maintainance of a gtr on what fay pays! teehee....

d

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1571900
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...