Jump to content
SAU Community

Recommended Posts

Ok, first post here and I wasn't sure whether I should put this in the turbo or non-turbo section.

First off, my mate has just bought a skyline, and I think he got an excellent deal:

1998 R34 4dr, 2.5L straight six (non-turbo), 4 speed tiptronic auto. Recently imported from Japan, no mods, everything in excellent condition inside and out (RAC inspector rated highly), 16 inch alloys, double barrel exhaust (not sure what size but it looks nice), no spoiler, metallic gunmetal grey paint. Came with 3 year unlimited warranty from dealer. $19,000.

When he first told me about it, I thought that he was getting very good value, but also that it was just about the least sporty skyline he could possibly have bought. Personally I would have preferred a 2dr manual non-turbo, but my mate said the cheapest of those he saw were nearing $30k, plus he specifically wanted a 4dr and was not fussed whether he got a manual or auto.

Basically the car looks great right now, and the only changes he wants to make in the short term are to fit some of the wheels that come as standard on the R34 GTR (I think they are 5 or 6 spoke 18 inch wheels in a sort of charcoal colour, but I could be wrong), and a nice (but not too low) body kit.

However, once his warranty is over, he would like a performance upgrade, and that is where my question lies: What would you reccomend as being the best way to upgrade the performance of his car? Would it be possible to fit the engine from the R34 GTR, or would it be too much torque for the auto to handle? Could he swap it for a normal R34 turbo engine (I have no idea what they are called)? Or should he simply have a turbo fitted to his current engine?

Also any advice on finding the wheels from the R34 GTR would be nice.

Thanks

Jezzamundo

Link to comment
https://www.sau.com.au/forums/topic/84715-advice-for-tuning-my-mates-skyline/
Share on other sites

easiest and cheapest: bolt turbo onto current engine, theres a howto in the n/a section of the forums, dan666 did it. wont be able to run a massive amount of boost pressure cos of the standard compression

hardest and most expensive would be complete swap to a different engine such as an rb26 from a bnr34, firstly youd have to buy the engine, then swap over all the parts and sensors and change sump and what else has to be changed to go from 4wd to rwd.

medium in cost and good gains could be a det head swap and then bottom end swap, with this you retain all the sensors and wiring and crap but get the det head and you could go the rb30 bottom end if you wanted for a bigger displacement

Thanks for the replies people. Does anyone else have any more advice?

My mate seems to think the most likely option will be swapping his current engine for a turbocharged R34 engine, but I have heard that entire engine swaps are always expensive and never simple.

I don't know what he will want to spend, I will speak to him and ask him exactly what he is looking for and what he wants to spend.

What sort of performance gains could he expect from putting a turbocharger onto the existing engine (2.5L L6 non-turbo. 142kW@6400rpm, 231Nm@4800rpm).

easiest and probably cheapest thing to do is sell it and and get a factory turbo version of the same model... imports 101 have 2 reasonable looking R34 4 door turbos for around the 21k mark imported and on the road. Add 1000 to get the inevitable scratchs/dents fixed and your probably still ahead of what it would cost to get someone to do a turbo conversion.

Tell him to take it to Rajab racing, for 3000-5000k it will be doing Mid 11 second passes, 1 of my mates spent arround that much for his 180sx, turbo,cams, cooler,injectors, exhaust, ECU, tune

And did the 180 come nonturbo from the factory?

Tell him to take it to Rajab racing, for 3000-5000k it will be doing Mid 11 second passes, 1 of my mates spent arround that much for his 180sx, turbo,cams, cooler,injectors, exhaust, ECU, tune

WTF... even if it was stock turbo I call bullshit.

Unless we're talking slicks and nitrous (tuned to get this pass at least once before blowing up)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
    • Continental have consistently beaten the absolute shit out of every other performance tyre in Wet/Damp/Cold conditions and give up a little bit of time (half a second at most) in the dry. Almost like it's engineered for German conditions or something. I'd def give those a try.
×
×
  • Create New...