Jump to content
SAU Community

Recommended Posts

Hey i have been a member for a while but not posted much but now since i have a skyline i have some q's!! Thanks in advance...

How much do the stock injectors flow?

Is running 15psi boost safe...

What is the viscous lsd like for drift...

zaffa

Link to comment
https://www.sau.com.au/forums/topic/85357-1997-ecr-33-questions/
Share on other sites

Hey i have been a member for a while but not posted much but now since i have a skyline i have some q's!! Thanks in advance...

How much do the stock injectors flow?

Is running 15psi boost safe...

What is the viscous lsd like for drift...

zaffa

Viscous LSD, is shit for drifting, as sometimes it doesnt act like a real LSD, sometimes only 1 wheel will spin :S

and as another people said: DONT RUN 15PSI, DONT RUN 12PSI WITHOUT FMIC

i has most run without a fmic maybe 9-10psi

LOL!, 3 1/2 years ago my car was STOCK, except i had a pod filter, i was running 12psi 0.8-0.9 bar for about 5-10minutes with some SPIRITED driving around. then it cost me $5000. because my turbo BLEW>>>... ($5000 for t3/t4 turbo + full turbo back exhaust & cat)

so yeah not recommended to run 15psi, or even 12psi if you car is stock.

my 2c

nah i meant its cool i wont be doin any mods for a while....

i have full comp insurance which is lucky and no i wasnt really pushing hard at all lightly greasy road....lost traction in 2nd spun into another car and hit front end into dirt embankment....was doin about 60 but no one was injured...which is most important....oh and i had just picked up the car... :) guess i learnt the hard way...

Shit - unlucky..

yeah need to take care in the wet - specially when it's lightly raining as all the grease comes up as you know..

hopefully everything will be fixed up and you'll be back on the road..

i'd suggest holding off on the mods for a while - get used to having 150kw and do some skidpan work.. than decide what to do..

hope it all goes well..

Anyone interested in an r33 half cut....i am after one and want headlights bonnets front bar radiator support and radiator....was thinkin about goin halves with someone....

Next..how hard is it to pack extra shims into the viscous lsd so it locks up better....aNd also is it dangerous to overfill the diff with oil...i have been told if you overfill it a litte by tilting car (on jack) you can fill it up more and therefore more pressure in diff so that it locks up better....however i had some concerns and they are to much pressure on diff will it blow any seals? and secondly with to much friction and heat it could warp the internals?? Can anyone confirm thisf for me???

Thanks in advance

zaffa

Anyone interested in an r33 half cut....i am after one and want headlights bonnets front bar radiator support and radiator....was thinkin about goin halves with someone....

Next..how hard is it to pack extra shims into the viscous lsd so it locks up better....aNd also is it dangerous to overfill the diff with oil...i have been told if you overfill it a litte by tilting car (on jack) you can fill it up more and therefore more pressure in diff so that it locks up better....however i had some concerns and they are to much pressure on diff will it blow any seals? and secondly with to much friction and heat it could warp the internals?? Can anyone confirm thisf for me???

Thanks in advance

zaffa

About the only thing u get by over filling a diff is asking to blow the breather out or blow shaft seals that is filling it "FULL" putting more oil in the diff gets u nothing as for the clutches let a pro do them to easy to blow the diff up & its f**king hard to do

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...