Jump to content
SAU Community

Recommended Posts

Already spoke bout my results in silvar33 post but as i promised i would put up my results again with a graph. I had it tuned at chasers and im happy with the results.

231.1rwkw

hks 2535

pfc

z32 afm

nismo fpr

bosch 044 fuel pump

(standard internals & standard injectors)

results were achieved in shoot-out mode

very happy with the car now and makes more power everywhere.

tune is very safe, injectors only getting 85-90% and knock not getting above 15-16

post-9200-1125022051.jpg

Link to comment
https://www.sau.com.au/forums/topic/85398-2311rwkw-with-hks-2535/
Share on other sites

Already spoke bout my results in silvar33 post but as i promised i would put up my results again with a graph. I had it tuned at chasers and im happy with the results.

231.1rwkw

hks 2535

pfc

z32 afm

nismo fpr

bosch 044 fuel pump

(standard internals & standard injectors)

results were achieved in shoot-out mode

very happy with the car now and makes more power everywhere.

tune is very safe, injectors only getting 85-90% and knock not getting above 15-16

Excellent result, and it really is 231.1 rwkw at 13 psi. The 231 rwkw out of the standard injectors is right up there, what sort of fuel pressure is it running to get that much out of the injectors?

I am targetting 200 4wkw out of the Stagea (equiv to 215-220 rwkw) and I am curious as to the fuel pressure I might need to run.

;) cheers :)

im a tight ass uni student

to get me these results it cost me jack

pfc $980 delivered

nismo fpr $155 delivered

hks 2535 $1300 exchange

z32 afm $230 delivered

tuning $500

total $3150-3200

installed turbo myself

already had:

3" exhaust

bosch 044 pump

surge tank

5 puk clutch

simple crap (boost controller, pod filter, bov)

no idea wat pressure in fuel rail (maybe 38psi)

I also have a similar setup, any idea what sort of boost the 2535 is most efficient at? is it 1Bar/14.5 PSI or even more?

Im waiting for a retune as soon as I get new coil packs right now its sitting on 12PSI, not sure how much boost I should be asking from a internally standard RB25

http://www.skylinesaustralia.com/forums/in...=ST&f=8&t=83883

SK

i made 218.7 rwkw on the stock turbo with the stocko injectors, only added a nismo fuel pump and a sard fuel pressure regulator, i think my mechanic said he wound up the pressure 4 psi, not sure, i'll see tommorow what my injectors hit when boost maxs at 1.1 bar, will let u know

but i know he didn't wind much more into it,

nice figures you got there.

I hate all you peeps with Rb25's.

Its not fair :D

Mine goes in to get tuned in the next couple of weeks and im looking for 220rwk's out of the lil ol Rb20 thumper :)

Cheers B

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...