Jump to content
SAU Community

Recommended Posts

Need to change whatever is in my radiator tomorrow as I'm doing a minor service on the car myself (oil filter change, oil change, spark plug change, etc). Just wondering as to which coolant is recommended to be run in a stock R33 GTST skyline these days?

Dont really want to go to supercheap and buy some cheap $5 coolant and then to find out it'll destroy the engine after 4,000k's like people have reported Mobil engine oil to come out all gluggy after 4,000k's when they serviced it.

So. Any recommendations?

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/
Share on other sites

I recommend using concentrate because you can never get all the water out the block if you cant get to the drain bolt. That way the remaining water doesnt dilute the premixed coolant.

I reckon Castrol's stuff is good. Also Nissans concentrate is good. If the coolant capacity is 8L, just add 33% of it (Ie 2.7L or 3L) and fill with distilled water. Remember to drain, and rinse the system with distilled water twice (ie fill--->run for 5 mins--->drain--->fill--->run for 5 mins---->drain)

Too easy...

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1546718
Share on other sites

having previously had an alloy radiator built for my old car i spoke to the radiator building guy about this. he has tried them all and reckons the green nulon one is the go. it's a glycol based coolant (like they mostly are). just make sure that whatever you use is suitable for use in a motor with an alloy head. not such a concern on RBs (iron block) but on my old SR20 (all alloy) you need to make sure you don't get a reaction when you switch coolant. that's the second piece of advice, pick a brand and stick to it as some brands won't go well together and can cause a chemical reation. not good.

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1546756
Share on other sites

rinse the system with distilled water twice

you don't need to use distilled water, tap water is fine.

imo, any coolant will do, don't really see the difference between more expensive brands, and as long as your car doesn't overheat, then you're fine.

(just read the label and make sure it's alright for your car)

Edited by MerlinTheHapyPig
Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1546970
Share on other sites

Yeah well if you've seen Adelaide tap water you'd start thinkin twice. Thus having a few litres of dodgy tap water still sitting in your block makes you wonder. Distilled water is cheap, no excuses.

Oh and I haven't had good experiences with Nulon's green. On 2 cars of mine the water pumps seals died soon after changing themover. Nulon green is actually a hybrid OAT/Glycol coolant.

Edited by Busky2k
Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1547207
Share on other sites

Ended up doin the coolant change over the weekend. Got a 5L bottle from Autobarn.

Autobarn plus many other skyline drivers I talked to about this on Friday night recommended that I only put 50% of the radiator's compasity of coolant in and the other 50% of the compasity of distiller water in. This, I have done and can see somewhat a bit more performance since the change.

Then again, I've also done a oil & oil filter change as well which really I think needed to be done.

Anyway! this weekend is the spark plug change. Just got to sit around the place I'm doing it at for 2hrs to let the damm engine cool down. OR! I could buy one of those huge industrial fans and let it blow on the engine for 10mins. LOL

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1550172
Share on other sites

Ended up doin the coolant change over the weekend.  Got a 5L bottle from Autobarn. 

Autobarn plus many other skyline drivers I talked to about this on Friday night recommended that I only put 50% of the radiator's compasity  of coolant in and the other 50% of the compasity of distiller water in.  This, I have done and can see somewhat a bit more performance since the change.

Then again, I've also done a oil & oil filter change as well which really I think needed to be done.

Anyway!  this weekend is the spark plug change.  Just got to sit around the place I'm doing it at for 2hrs to let the damm engine cool down.  OR!  I could buy one of those huge industrial fans and let it blow on the engine for 10mins.  LOL

hey if u are talking about mixing concentrate with distilled water, generally you only need to mix around 1/3 concentrate with 1/3 water, and you would never put all the concentrate in!!

changing the coolant wont give u a performance benefit you can feel so ill assure u that the gain u felt was in your head :huh:

with the spark plug change unless your hands are very sensitive you can usually remove most of the stuff straight away when engine is hot, i usually use a rag when im touching hot parts when changing spark plugs so try that dont bother waiting u should be fine..

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1550633
Share on other sites

hey if u are talking about mixing concentrate with distilled water, generally you only need to mix around 1/3 concentrate with 1/3 water, and you would never put all the concentrate in!!

changing the coolant wont give u a performance benefit you can feel so ill assure u that the gain u felt was in your head :D

with the spark plug change unless your hands are very sensitive you can usually remove most of the stuff straight away when engine is hot, i usually use a rag when im touching hot parts when changing spark plugs so try that dont bother waiting u should be fine..

Didn't say I got extra performance just from the coolant. I also did a oil service (oil change and oil filter change) to which would of helped with whatever extra performance I may of felt. Then again, cold air could of also been part of the factor for the turbo.

Or fact I probably didnt drive the car for a few hours to which had let the engine cool down. Plenty of facts could of been apart of the reason to what performance I may of felt.

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1550857
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...