Jump to content
SAU Community

Recommended Posts

Originally posted by Hicks

Cool, whats the safc 2 like?

Any differences??

Quite a bit more tuning resolution, 12 vs 8 points and increments of 200rpm vs 500rpm.

It has one more wire for the knock sensor input. Handy for tuning without the dyno.

It took me just under 2hrs to install and get running, these things are too easy:D

I might have to copy someones low and high throttle mixture settings to have a better play.

Hicks, can you tell me what you have for the low and high ranges, also the percentage throttle for low and high.

I have followed the jap manual's reccomendations about a setting to try, it's a little better perhaps (hard to tell driving around the suburbs) but I don't think it's all that flash.

I'll leave the settings on '0' for the drags tommorow and have a muck around while I'm there.

Link to comment
https://www.sau.com.au/forums/topic/8559-s-afc-tuning/#findComment-126861
Share on other sites

rev210,

Congrats on the purchase, it will be interesting to hear what the tuners have to say about the SAFCII, I'd be pretty sure that it will be the same to tune but the extra points will provide a much better curve. Let us know when you have it tuned and the results.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/8559-s-afc-tuning/#findComment-127154
Share on other sites

Hmmm..... These guys that you are recommending..... Can they do all types of work??? I ask becuase I am looking into buying the Apexi SAFC, AVC-R and a second hand GTR cooler and I want to find a place that has a good rep/record to fit all three into my car...

Link to comment
https://www.sau.com.au/forums/topic/8559-s-afc-tuning/#findComment-127166
Share on other sites

Gts-Vspec.

If people can give some of their settings for the S-AFC on the RB25det with stock turbo , I'll get an idea of the curve to use and I'll do a bit of tuning at the drags tonight.

The knock sensor input is great, I used it to look at timing last night its very helpful(and sensitive) and I'd say with the data log (all 30sec of it) you could do a half decent job of road tuning.

Link to comment
https://www.sau.com.au/forums/topic/8559-s-afc-tuning/#findComment-127168
Share on other sites

MrGTST,

In general all of the tuners mentioned will tune just about anything, they all have there favourites that they are especially good at.

rev210,

Hicks should be there tonight, so hopefully you can get some rough guidelines from him, but seeing as all cars act a little different even on the factory computer I'm not sure how useful it will be. Hope to see you there tonight and have a look at the new purchase.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/8559-s-afc-tuning/#findComment-127178
Share on other sites

yeah its called the S-afc II on the controller and box, but its the third release model. The first being the one with 'dials' and no blue screen. The second the blue screen, this one blue screen with no buttons just a playstation anolgue style joystick and jog dial.

Link to comment
https://www.sau.com.au/forums/topic/8559-s-afc-tuning/#findComment-127179
Share on other sites

Gtst-vspec,

See you there, it looks like it might be a little cooler tonight, have to see how much humidity we get also. Your running a haltech right? I used to play with those back in the F7B days, so easy to tune.

The factory map is much the same for everyone if they have the same computer, the differences in car mods have an impact but, the same shape of correction curve is used to extract more power.

I don't want to re-invent the wheel I guess and I strongly suspect that those with a good S-afc tune all have a similar graph. We don't know for sure because no one has ever posted a log of settings for others to compare. On something common and simple like a S-afc having a little archive would be great to help people come at the concept as well as help us driveway and road tuners save time.

Link to comment
https://www.sau.com.au/forums/topic/8559-s-afc-tuning/#findComment-127188
Share on other sites

rev210,

I actually run the new Wolf Ver 4. Seems to be good, and very soon I'll have anti-lag and rotational idle to boot, firmware updates.

I thought that the AFM would have a large impact on the tuning of the SAFC's, and seeing as each AFM has it's own curve, unfotunately they aren't actually linear, then the difference in settings between cars could be large.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/8559-s-afc-tuning/#findComment-127198
Share on other sites

The weird thing is the Jap manual has 3 different setting reccomendations for Hi and Low maps, that they provide a graph for to show the effect that each has on the A/F ratio across the rpm. The same reccomendations are made for the RB25det Neo, which has its own page, although the throttle Hi/Lo % is different. This is different between the series I the series II and the Neo R34 RB25DET, but the map stays the same.

Link to comment
https://www.sau.com.au/forums/topic/8559-s-afc-tuning/#findComment-127218
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • In the US almost everything is E10. It can't exceed 10% by much or fuel systems have trouble adapting. At the same time because MTBE, MMT, and TEL are all banned they need as much ethanol in it as possible to boost octane.
    • I was mostly jesting. In my experience (and probably only my experience) the R34 GTT physical airbox space is actually too small to flow the amount of power it wanted. By sealing the box, I made it so it could only be fed by the ducts themselves. So you can seal it up and get nice cold air which IS good, but at a certain crossover point: More Hot Air > Less Cold Air I don't think you're at this point. In my case merely ducting the hot air intake with a very focused set of ducts counteracts the fact it's in a V8 engine bay. More cold air obviously best. The solution looks great.
    • Nah, the OEM CAI pipe is still installed behind the bumper, it is about 5" x 3" oval at the engine side, tapering down to a 3" pipe behind the bumper where it gets all the ambient air it needs Engine side of radiator support OEM intake pipe "oval hole" that is right in front of the filter My OEM NC1 CAI pipe: From NC2 onwards, below pic, they come slightly smaller at 2.75" diameter with corrugations and a resonance chamber to reduce intake noise, lucky for me my NC1 has the bigger noisy one, LOL   Basically, the "sealed" airbox will just get ambient air from a 3" pre filter intake tube that is the same size, 3" as the rest of the intake pipe post filter, and if a 3" intake isn't big enough to flow enough air for 150 killerwasps then there are other issues The whole intake is basically the same length as OEM, but it is now about 30% bigger from the airbox back through to the new intake plenum than OEM, and the intake plenum is port matched to the head And the intake is now about 30% bigger than my 2.5" exhaust, so the suck, squeeze, bang and blow black magic should be fine, well, to my uneducated understanding of fluid dynamics anyway Talking the the guys at MX5 Mania, it may even make a few more killerwasps as the intake isn't sucking hot air, especially off idle or when in slow traffic when it would be sucking hot air  As for the difference in IAT, I haven't logged IAT yet, as I don't currently have a OBD2 reader, but I will have a play with my thermal lazer thingie next time I take the car out to sèe how hot stuff gets under the bonnet near the intake filter prior to installing the air box, my "assumption is it has to be much better after the air box is in and sealed up compared to what it is now The aftermarket "performance" CAI elephant in the room: Aftermarket CAI intakes typically have the air filter tucked up behind the bumper, with a 2.5" intake tube (the OEM intake pipe is actually about 30% bigger than the fancy pants "aftermarket" version.....WTF), and you need to remove the bumper to service the filter, which is a PITA Like dis:    
    • Nice one, I'd argue that the white S1 RS260 is certainly the best looking of the Stageas. And yes, fully agree on the forum situation. It's a bit of a shame, but at least SAU is a good place to be. I found the facebook groups to give me FOMO because people were trying to one-up each other and show off in some way. Feels much more natural here. There are people with seriously nice builds, but I can appreciate it rather than it making me question my life choices. Might be that people are more open with sharing how much work/money/suffering it takes to actually get there. 
    • Evening, wanted to pop in and finally register to say hi to everyone here on SAU!   It's been a while since I've been active on a forum, but back in the day I used to be relatively active on ClubLexus and other hobby-related forums. I'm glad to see SAU is still around, since with the advent of Facebook and Discord it seems forums aren't what they once were. As a recent new owner of an S1 260RS Stagea, I've found so many older guides and helpful tips from SAU that I figured I needed to join and say a grave thank you. My recent acquisition has only become legal in the US for the past year, and knowing that similar car enthusiasts from across the pond have already figured out the kinks and tricks to get these 25+ year old cars running well. I look forward to diving into more of the SAU forums as well as hopefully contribute some info myself for future posterity.   As a pic tax, here is one of the few good photos I have of my Stagea. I hope to get way more in the future!    
×
×
  • Create New...