Jump to content
SAU Community

Recommended Posts

Hey peoples

im converting my mates 32 4 door from auto to manual and have heard a viscous rumour that the coupe 5sp crossmember doesnt bolt up to the foor doors mounts is this so???? does anyone know what can be used in place of this ie s13 or will i have to get a custom jobby

cheers

Ben

Link to comment
https://www.sau.com.au/forums/topic/85603-r32-4-door-crossmember/
Share on other sites

were are u? at four brothers imports in Adelaide had two 4 doors burnt awhile ago and may have a spare cross member look em up. I have never heard that there different though see if you can find a four door and a two door and line them up and stick your head under them both.

I can't confirm this but someone posted that you can bolt the r33 manual in the place of the r32 auto.

Has anyone done this?

I've also read here somewhere that you can use an S13 crossmember to bolt up the R33 manual box into an R32 manual.

I don't recall whether it was an auto or manual crossmember.

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...