Jump to content
SAU Community

Recommended Posts

Basically a social get together to have a yarn and maybe a bbq.

I've taken a look at the calendar n figured the 24th is prolly the best option. Im thinking somewhere in the sutherland shire (for a bloody change! :) )

If not a bbq, then prolly a lunch meet or somethin, and then maybe a small cruise if we can all be buggered.

Reason for chosing the shire is because everyone bloody choses north sydney nowadays! :)

Anyway, im thinking meet up at around 10am on either waratah street in kirrawee or at cronulla and go from there?

Any thoughts/comments?

Anyway, if you are keen then post and we will get some plans set in concrete closer to the day, just finding a meeting spot is tricky-ish ;)

As for the cruise, i was thinkin down to otford maybe?

Link to comment
https://www.sau.com.au/forums/topic/85666-social-meet-small-cruisephoto-shoot/
Share on other sites

i'd SO be in if it was after the 5th as i get my lisence back then.

sorry guys, i want to start coming to these. i've missed out the last yr and a half (lisence gone bye byes), but ill definately make the next one.

meet point will be near the eleura surf club or up near the wanda surf club, space dependant, so on the day you'll have to drive past both n play spot the skyline ;)

wanda is the next beach up from north cronulla, and eleura is the next one up from that

k this is now kinda in doubt, my car is off the road for a lil bit due to some damage, don't know how long for.

Hit oil/grease what ever on the road going around a sharp-ish bend, was doing around 40km/h in 2nd, lost traction majorly, boost hit, spun and went into a parked car



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...