Jump to content
SAU Community

Recommended Posts

if it seams to crank quickly then it is ok ,i think stock is somewhere in that range a few things do you plan to run a stereo in you car if so i would go a little larger to say something like 500-600cca mark ,i run an optima yellow top which is 600cca and is great.

i dont know how full you batt should be being maintance free and all ,i knew i needed a new batt when 4 oclock in the morning came and would have trouble starting due to cold weather, real slow cranking.

and my batt was the genuine r33 nissan battery.

hope this helps :D

Edited by gtstcoupe

I had a maintenance free battery and it spat acid out into my boot. Now I have a servicable one and its been running fine.

As GTSTcoupe said, if it cranks the car ok leave it, if you are going to run a heap of auxillery gear then you may have to upgrade.

Cheers

Sumo

Im thinking of wither getting a gel one from the forums ($140) or a new 300cca one from nissan (they do century) for about $70 - thats the one they sell for skylines - it is maintenance free

THe old one is 300cca but I think its had its day. Its charging at 14.3 volts but doesnt hold charge.

IMO, do it once, and do it right the first time.

Ask yourself this question. do you like rusty metal? acid everywhere? paint peeling? acid in your boot carpet? if so, then buy the $70 one.

If you like things clean, put it in, never touch it again, buy the gel one.

I had to make this deicsion, and as i'm sure you're aware of which one I chose :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...