Jump to content
SAU Community

Recommended Posts

  • Replies 175
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Steve, I emailed Darron yesterday mate, is he the best person to contact?

I wanted to talk to you about some other bits too.

Yes mate, we have been extremely busy but if you emailed Darron he will most certainly get back to you.

Give him a call if you are after some other bits as well

Steve

Hi Ben, trying to locate a photo for you - will post one up as soon as possible.

Regards,

Steve

Nozila and Tea, please email us at [email protected] and I will get back to you tommorrow with the seat dimensions :)

Cheers,

Steve

Hi guys, approximate dimensions of the seats are as follows:

Overall Height: Approx 90cm

Widest Point: Approx 53cm (shoulder to shoulder)

Internal width at rear of base: Approx 33cm (actual seating area)

Internal width at front of base: Approx 36cm

Note: We now have 5 sets of black with grey centre, 4 sets of black with red centre and 4 sets of black with blue centre remaining so get in quick to avoid missing out.

The black/red version is winder type, and the black/grey and black/blue versions are lever type

Cheers,

Steve

Hi Zaffa, we have the black with red centre versions available, with full red versions due in the next shipment.

The total price for a pair of these seats delivered to the Gold Coast is $430.

Cheers,

Steve

Hey Mate, i will take the set of two in red when they arrive if you can hold them for me and when the shipoment arrives i will transfer the money into your account...thanks for your prompt reply.

zaf

Hi Zaffa, we now have some sets in stock in the following colours:

1. Black with grey centre

2. Black with red centre

3. Black with blue centre

If you would like to place an order please email us at [email protected]

More of the full black seats will be arriving in the next container, along with the full red colour.

Please get your orders in as early as you can to avoid missing out as all seats are pre-selling extremely fast.

If you have any questions at all, please dont hesitate to ask.

Cheers,

Steve

Do you know if these particular "universal" rails can be removed, and the seats bolt onto genuine bride low seat rails? Basically I have a shagged Brix and a passenger side rail, so it would be tops if they could bolt straight on!

Id like to think that the copiers had this in mind when making them!

JK

Do you know if these particular "universal" rails can be removed, and the seats bolt onto genuine bride low seat rails? Basically I have a shagged Brix and a passenger side rail, so it would be tops if they could bolt straight on!

Id like to think that the copiers had this in mind when making them!

JK

JK, we believe so - we actually ordered in some genuine Bride rails to confirm this but we received the wrong version!

As far as I know, the answer is yes

Hi JL, the all red sets are arriving in 4 weeks but we are pre-selling them very very fast. You are best to get your payment in if you wish to secure your set and avoid missing out.

If you would like to proceed with your order, send us an email at [email protected] and I will get back to you with payment details.

Cheers,

Steve

Im keen on a set of Red, however I think Id only be definate if they do actually just bolt upto a normal Bride Rail. Is there anyone who can try this at JustJap or who have got them and tried it?

Ta

JK




  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...