Jump to content
SAU Community

Recommended Posts

Hi mate,

Simple answer to that one. This isnt the first delivery of seats we have had. We received a small number of them many months ago, all of which were sent to Victoria for the ADR testing process.

The container we received Friday is the first full container load we have received, that were available to customers.

I hope this answers your question

Regards,

Steve

  • Replies 175
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi Steve,

Received my seats today thanks mate. They look unreal thanks for your help. Excellent service was always kept in the know as to when the seats would arrive every questioned asked. Excellent service.

PS Any one know where to take these to get fitted around Melbourne preferably in the SE suberbs.

Thanks

Jamie

Hi guys, we have just sold the last 3 sets of Red Bride style seats.

Anyone wishing to reserve a set from the next shipment is encouraged to do so now to avoid disappointment as we are already pre-selling seats from our next container load.

To confirm again, RED BRIDE STYLE SEATS ARE SOLD OUT!

Cheers,

Steve

Has anyone installed one of these in a four door vehicle yet? ie. 4 door R32, Cefiro, Laurel etc. Only asking as I have a bride seat which is unable to be moved forwards or backwards due to the B pillar hitting against the top RH side of the seat.

And lastly are they comfortable seats at all? :P

hey i rang today talked to a fella said he would pass on the msg i was after a set of red ones and was willing to wait till next shipment so put me down i got quoted 420 post to mildura can u pm me with more payment details

josh

they're bride style dude, not actual Bride seats. There is no way anyone could do recaros for that price :rolleyes:

Yeah no kidding.... but they now also have Recaro replica's.....

Which have the same price as the Bride's on the site, so I thought it was worth asking if they can do the same price on the Recaro's for SAU mambers...

when will the seats be back in stock? thank you

Hi Donno, we are expecting the next container load within 4 weeks.

The seats from the next load are already pre-selling fast so if you are thinking of placing an order, best to do so sooner rather than later to avoid missing out.

Cheers,

Steve

Hi Mark, thanks for your order.

We expect the next container load of seats before Christmas, assuming that we dont encounter any further delays due to the recent problems at customs in Sydney

If you wish to check the status of your order at any time, please feel free to give Darron or Trevor a call on (02) 9545 0532 and they will be happy to assist you.

Regards,

Steve

  • 2 weeks later...

Hi guys, we have just received a 40ft container of Bride style seats in both Red and Black

Get those orders in now in time for Christmas to avoid missing out.

Order online now at http://www.justjap.com/bridestyleseatspecial.htm

Cheers,

Steve :P

the pics of the red ones on your site are not working, you got any available?

Our photos and seat pricelists have just been changed, and the images are now visible.

Here is the photo of the red Bride style seat

redbridestyle.jpg

Cheers,

Steve




  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...