Jump to content
SAU Community

Recommended Posts

How it should be done....if you want to get defected every 5 minutes :(

every three weeks actually.. haha

Last time I got defected in it I got warned that if im caught driving it on the road again it will get impounded and I will get locked up.

How it should be done....if you want to get defected every 5 minutes :(

man up, my cef sits 5cm off the ground at the lowest point. i really need to get a bash plate. my lower cotrol arms keep copping manhole covers, ramps and driveways :D

also, I might lowball you on your smashy kit sometime once my 32 is out of the paintshop.

my shatbox

1988 cefiro

originally auto non turbo

converted to manual rb20det

autech kit

jic FLT-FAS coilovers

tune agent castor arms

jic camber arms

solid rear cradle bushes

nismo 2way

blitz single plate clutch

hypergear front mount kit

gkteck dump and front

HKS 25/35 turbo

blitz cat back

bride seat

gkteck steering wheel

GReddy boost and oil temp guage

GReddy turbo timer

just jap radiator

front 17x9 +13 weds

rear 17x9.5 +22 SSR professors

late model chrome grill

bride centre console

splitfire coilpacks

just jap radiator hoses

r32 gtst passenger seat

factory weathersheilds

goes for tune friday at status

in the mail: front and rear swaybars

blitz front mount kit

gtr injectors

IMG_0028.jpg

My Missus's R34.

Im soon to inherit it when she gets a new 09 forester. Plans for it are to turn it into a nice club level car, its basically stock now, Nismo coilover's, Catback, K&N panel filter, Splitfire's, rims and i half a full set of arms ready to go in, front and rear camber, castor, and a hicas bar.

post-11869-1250993251_thumb.jpg

I don't know if I want rear pods. I did think about it, but personally I think I'll be right without it.

Nisskid, sell me your front bar before you crack it :D (I know it's plastic and is gonna take a good hit to crack it) but still, I need it haha. It's the right colour too ;) Looks tough without the left headlight.

haha its already cracked when i had it bolted down and took out a few tyre stacks at 80k's, taking the impact was fine but cos it was bolted on it tore it away, nothing a few cable ties couldnt fix haha. going to get it all plastic welded up soon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...