Jump to content
SAU Community

Recommended Posts

it will be my streeter for japan, so will do the daily duties when i stay over there, also used for skids on the street, and as a final backup if my missiles break.

will slowly mod it while it's over there, wondering if i should go the slammed stock kit on 15's look, or the big kit and 18's look. definitely no missiling this car, it will probably be my first import i actually take care of the looks with it haha

thinking something like this:

http://carher0.files.wordpress.com/2010/04...w=800&h=600

http://carher0.files.wordpress.com/2010/04...w=800&h=532

once it's done it's 2 years, ill bring it back as a personal import and street it here

it will be my streeter for japan, so will do the daily duties when i stay over there, also used for skids on the street, and as a final backup if my missiles break.

will slowly mod it while it's over there, wondering if i should go the slammed stock kit on 15's look, or the big kit and 18's look. definitely no missiling this car, it will probably be my first import i actually take care of the looks with it haha

thinking something like this:

http://carher0.files.wordpress.com/2010/04...w=800&h=600

http://carher0.files.wordpress.com/2010/04...w=800&h=532

once it's done it's 2 years, ill bring it back as a personal import and street it here

i vote tough offset and slammed

please dont ruin that laurel Stewy looks awesome, i rekn leave the kit as is and just get some better 15's........think of the cheap tyres

the main reason im thinking 15's is cos i wanna run like 185's for street, slows down the skids a little bit and makes it easier to train with people on the street

please dont ruin that laurel Stewy looks awesome, i rekn leave the kit as is and just get some better 15's........think of the cheap tyres

all tyres are cheap here. if you pay more than about 5000-6000yen new for anything for skids here your going to the wrong shop.

the last ss595's i got were about 5000yen each in 215/45/17

the main reason im thinking 15's is cos i wanna run like 185's for street, slows down the skids a little bit and makes it easier to train with people on the street

you mean you'll have no grip with the 15's so you'll have to slow down the skids because of grip issues ?

good to see your still going the 4 door route, looking the guds :D

it will be my streeter for japan, so will do the daily duties when i stay over there, also used for skids on the street, and as a final backup if my missiles break.

will slowly mod it while it's over there, wondering if i should go the slammed stock kit on 15's look, or the big kit and 18's look. definitely no missiling this car, it will probably be my first import i actually take care of the looks with it haha

thinking something like this:

http://carher0.files.wordpress.com/2010/04...w=800&h=600

http://carher0.files.wordpress.com/2010/04...w=800&h=532

nice , i vote stock bars , nice rims , ultra clean :/ oooorrr big kit big rims clear lights everywhere orr :D

look at this interior, f**k yeh!! haha, all it needs now is some VIP food trays and dildo gear knob.

72486_456466128743_733698743_5423642_1373816_n.jpg

nice , i bet you have roof lining too :) , don't forget drink holders :)

pics: better offset would make this car look tuff:

post-20231-1288610188_thumb.jpg

post-20231-1288610204_thumb.jpg

post-20231-1288610268_thumb.jpg

post-20231-1288610299_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...