Jump to content
SAU Community

Recommended Posts

if i could catch public transport to my work i would, but since i can't i'm car pooling it with another work mate. i have already notified the difference in my pocket!

I drive like I normally do - the difference of $3 per 100km isn't going to kill me.

I'd be very interested to know how much of a difference a SAFC makes to fuel economy though. Has anyone done a before and after test? I currently get 400km to 45-48L pretty much every tank.

Edited by TommO

close my eyes when filling up... that simple. my daily takes over 80L diesel to fill up.... good thing i only have to do it once a month.... since fuel prices have gone up, i let the glow plugs warm up properly so it doesnt use too much fuel when starting.

theres no use complaining, everyone needs fuel...

cheers

Linton

MUHAHAHA... i knew the N/A R32 was good for something... although $1.50 for a litre of 98 RON does hurt the wallet jus the same... it just dosen't hurt as often.

if your gonna buy or drive a turbo car you have to know its not cheap., people dont realise that petrol is still very cheap compared to europe where i was paying over a euro per lire which was about 2 bucks a year ago, when the prices here come to about 2 dollars a litre youll see what expensive is, but so you all know it will get to that price very soon

if your gonna buy or drive a turbo car you have to know its not cheap., people dont realise that petrol is still very cheap compared to europe where i was paying over a euro per lire which was about 2 bucks a year ago, when the prices here come to about 2 dollars a litre youll see what expensive is, but so you all know it will get to that price very soon

don't forget that the living standard overthere is higher than in Aust as well as their incomes. I'm not whinging about the high petrol prices coz that don't change anything, just thinking of some ways to save petrol without having to sell the car :( But if the price gonna rise to some ridiculous level I guess there would be no option and might have to sell the line at a massive loss :D

Also don't forget that until not too long ago we were paying more for a litre of milk than we were for a litre of petrol - even the 98RON stuff was cheaper...

When it hits the highs of Europe then we will really have to worry about it!

No wonder they all prefer diesels there, and no wonder diesel technology has come such a long way in such a short time.

Apparently, fuelling up a diesel is reportedly still a messy and smelly affair, from what I've heard and read - is that the case?

Apparently, fuelling up a diesel is reportedly still a messy and smelly affair, from what I've heard and read - is that the case?

It's dirty and smelly because diesel is dirty and smelly and so are the truck drivers who used your bowser before you do in your BMW X5 diesel (I'm kidding!)

Just use those gloves that the good servos provide.

T.

It's dirty and smelly because diesel is dirty and smelly and so are the truck drivers who used your bowser before you do in your BMW X5 diesel (I'm kidding!)

Just use those gloves that the good servos provide.

T.

I've never seen a servo provide gloves for diesel... and my family has two diesel cars.

you guys got it all wrong, diesel fuel smell is the same as unleaded, its the way the diesel engines burn the fuel that smells, but with new direct injection technology the smell of diesel cars has dissipated my more the 80percent, and as for the living standads being beter in europe and the income is higher, i think you got it all wrong jeetee, the average australian income is higher then the average europe income, people living on 1000euro salarys, yes 1000 euros a month, still have to buy petrol like everyone else at the same price, and everything else is the equivilant like here. so who do you think is beter off, we here with out average 3000-4000 saleries or them over there with high petrol and living expences with low monthly incomes...

i checked how much there base fuel price cost and how much is tax ontop of that, and there base fuel price was well below ours, but they just had a huge ass amount of tax on it though.

got the stats off the Shell site. there 1 year old though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...