Jump to content
SAU Community

Recommended Posts

Had a look at the SEVS lsit today (I think it's the current one, not sure if it will change as of May 8th) and it looks as though pretty much ALL R-34's will be eligible to import.

That includes the RB25DE atmo and even the RB20DE...

The link is here.

Just click on the second-last option on the left of the page: "Register of Specialist and Enthusiast Vehicles"

Also, if you have time, check out the link above that ("SEVS Information" - the third-last option) and go through the bulletins towards the bottom of that page. Lots of reading, but an insight into what they're trying to do.

Either way, it sucks in my opinion. Why restrict the number of cars coming into the country, when they serve the purpose of:

- satisfying a market not already catered to;

- supporting a lot of new or fairly-recently established businesses;

- protecting the jobs of the people employed in these businesses; etc.

They state in the first bulletin that the purpose is to ensure that quality cars are coming into the country, which is fair enough if that was their only agenda.

I'm sure I'm not the only one who thinks that it's more of a money-making scheme and/or a pandering to the requests of the bigger local car-makers. I think that's including Toyota, Nissan and Mitsubishi - who were obviously not game enough to cater to the market in the first place, and are now jealous that they've missed their opportunity and/or are losing sales to the "Grey Import" dealers and importers. I've also heard that parties responsible for implementing the SEVS rulings have actually clearly stated that they are deliberately out to reduce or shut down the industry bracket...

Oh well, time will tell.

I'm going to go through all the bulletins and see where it seems to be leading us.

Originally posted by blukie

I'm interested in purchasing a R34 4 door

Here is a pretty cheap one Blukie, in tiptronic form.

For sale: RARE 1998 R34 GT-T Turbo, 4-DOOR, Silver, Auto, $23,900 plus tyres and ORC's. This is available via Prestige Motorsport in Perth [hope you dont mind Geoff!]

Contact:

Geoff Risbey

Manager

Prestige Motorsport

0418 944 253

www.prestigemotorsport.com.au

At your service Mon to Sat from 9am to 6pm WST

Thankyou all for your replies. NISMO R34 thanks for the example you spotted. I have spoken to Geoff breifly about this car and yes it will be $7000.00 to comply this car.

Does anyone know why ????

1 reason I got from Geoff was that the front headlights have to be replaced because the projector headlamps do not comply. So basically if you purchase an R34, I believe that you pay someone to downgrade your headlamps, you pay labour, pay for the down graded headlamps and they don't even give U back the originals.

You purchase the car, I believe you have the right the keep what comes with it.

I really, really want an R34 4 door, but can't justify paying someone to "downgrade the car" . That's stupidity.

Well it looks like it's back to HSV for me.

SEVS rules SUCK.

The 2 door is generally the same in regards to the lights - if you are lucky you may get to keep the originals :P

Originally posted by blukie

Thankyou all for your replies. NISMO R34 thanks for the example you spotted. I have spoken to Geoff breifly about this car and yes it will be $7000.00 to comply this car. 

Does anyone know why ????

1 reason I got from Geoff was that the front headlights have to be replaced because the projector headlamps do not comply. So basically if you purchase an R34, I believe that you pay someone to downgrade your headlamps, you pay labour, pay for the down graded headlamps and they don't even give U back the originals. 

You purchase the car, I believe you have the right the keep what comes with it. 

I really, really want an R34 4 door, but can't justify paying someone to "downgrade the car" . That's stupidity.

Well it looks like it's back to HSV for me. 

SEVS rules SUCK.

it cause therew is only two dudes in australia who can do it for you

one in sydney

and one of these people are the only people in aust that do the headlight conversions leaglly.

if you need one done give us a bell cause i can hook you up for a cheaper price

pete

0409226626

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...