Jump to content
SAU Community

Recommended Posts

I was just recently browsing the sau gallerys when I cam across such a beast.

DSC03541.JPG

I beleive the wheels are the ssr proffesor sp-1 that are now discontinued, I was curious if anyone knew this member? and if so what width and offset are his wheels. Simply delicious! Im guessing something like 9.5-10" wide with a low offset +15-18?

thank you very much!

cheers

John

im more amazed that u could tell what wheels they are from that angle lol

So simple, just click

file-> image ->rotate angle 70 degrees -> show wheels.

ofcourse there was more then one pic of this car.

hehe

Edited by JBNR32
So simple,  just click

file-> image ->rotate angle 70 degrees -> show wheels.

ofcourse there was more then one pic of this car.

hehe

ah i c, thought u would've posted the 1 that actually showed what u were talking about...but thats just me. lol

  • 1 month later...
hey ppl..just found this thread

Wheels are WORK Termist S1C

18 x 9.5" with a +13 offset

265/35 tyres..bought from CRD here in sydney for $$$$$ :) but they look hot (Y)

post up some better pics mate. the first pic is terrible for seeing the rims

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...