Jump to content
SAU Community

Fri 14&29th Oct Drive Day, At The Creek $120


Recommended Posts

All,

If you want to do a track day at Eastern Creek, this is the cheapest option since Moto Concepts were kicked out. It’s a Private practice day run by the ARDC, you will need a L2S or C3 licence to attend.

There are actually 2 days.

Friday the 14th Oct 05 and 29th Oct 05

Details can be found at

http://www.eastern-creek-raceway.com/ Click on Private Practice.

Cost $120 for the Day!

You will need to be an SAU Member and part with $80 bucks for a CAMS L2S licence if you dont already have a CAMS licence.

If you want tickets to the V8's then become a member of the ARDC ($150) and the cost becomes $80 for the day!

Normal non flammable head to toe cloths and a Helmet will get you in, and a road worthy car, they do check them!

These guys run the day very much like a race meet so they can waist a little bit of time being pedantic, but its always good value. With only Cars and L2S they are likely to run alternate 20 or 30 min sessions all day.

Im going to the Friday and Maybe then again on the next one.

Abo was keen as well.

Please let me know if you want to come, and I will contact the creek to let them know the numbers. No need for deposits or anything, you can arrive on the day but they do ask you let them know so they can balance numbers. Please dont commit unless you are 100% coming, no keyboard warriors, I dont want to advise the ADRC we are coming with 15 cars and only have 5 turn up. If you commit, the only excuse I will accept is a dead car or family member.

I will continue to update this post with names.

14th Oct 05

Oz GTR - R34 GTR

azzr32 - R32 GT

voqi000 - GTS

Zane - R33 GTS

Beer Baron - GTR

29th Oct 05

Neil

Thanks

Edited by Oz GTR02V
  • Replies 134
  • Created
  • Last Reply

Top Posters In This Topic

For this and all other questions it may be best to call them direct 96721000, but I thought I saw other cars with slicks last time I was out there, perhaps they were semi?

azzr32, see you there, your on the list.

vogi000, Contact Dunkan or one of the other committee members. It takes 2 weeks for your book to come through, but you can drive on the day with a receipt.

just one thing to check is that these two dates are not C3 only days. quite a few of the car practice sessions are reseved for C3 (now PC) licence holders only. there are L2S ones too though.

I may be up for it, but i'll let you know when i am certain. Should be a nice day out providing it's not too hot by then. We raced at EC on the weekend and on the saturday it was very hot already! :D

You don't really need to confirm the spot although I think Paul will be letting them know. They don't enforce limits on the number of cars at these days so you wont miss out.

Re the license Adam can give you one on the day if you are an SAU club member. Otherwise go to the CAMS site ASAP, download and send back the license application form for L2S

I'm just trying to figure it out.

The form on the website is sent directly to CAMS, there's no facility for the club issued licences on it, and no need for a club rep to fill anything out.

The forms CAMS sends to the club have the "Temporary" slip on them.

When you rock up to one of these days, or any CAMS sanctioned event, as a competitor they should ask for both your CAMS Licence and your club membership card ( to show you are a member of a CAMS affiliated club).




  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...