Jump to content
SAU Community

Recommended Posts

damn secrets :pirate:

sounds good Gary.

Well, if i were to get the adjustable stabiliser bars, i'm not in any danger of that part being modified anytime soon am i? I'd rather wait if you're going to change that part of the kit in the next few months.

Eventually, i hope to put together the WHOLE kit, but will have to do it bit by bit at this stage. Stabiliser bars being the most obvious starting point.

Is there any dramas just getting the stabiliser bars on their own? do i need to buy any of the other parts at the same time?

cheers for the quick reply :ph34r:

chinny

One of the drawers in my home office filing cabinets is full of confidentiality agreements. That’s how much people protect their IP these days.

No change in the Group Buy stabiliser bars on the horizon. I am very happy with their function. They come complete with everything you need to fit them. So order away, with total confidence.

I am off to Bathurst tomorrow for the 12 Hour race, the race team is running (not a Skyline) and I have to do my Team Manager thing. I will be back on Tuesday, so please excuse the slow responses to posts and PM's.

:ph34r: cheers :mad:

  • 2 weeks later...
  • Replies 322
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Roughly how much would it cost to get all this stuff installed if you took it to a suspension place? or is it the kind of thing you can do at home?

With home garage tools, most guys can do everything except press the bushes in ($50) and the 4 wheel alignment ($whatever).

If you get a decent suspension workshop to do the whole lot, it will take one guy a full day. So multiply 7 hours by their hourly rate.

:) cheers :thumbsup:

Hi, do you still have the rear shocks for the R34 GTT Sedan, and what is the cost include postage to WA?

As per page 1,

Rear Bilstein Shocks $476.00

Freight $10.00

Sub Total $486.00

PM for more details.

:D cheers :)

As per page 1,

Rear Bilstein Shocks $476.00

Freight $10.00

Sub Total $486.00

PM for more details.

:D cheers :(

Thanks!! Do i need any other items to replace this with the original shocks?

:(

Thanks!! Do i need any other items to replace this with the original shocks?

:D

Nope, the Bilsteins are a straight replacement for the standard shocks

:( cheers :(

Thanks for that, how can I order? Please send me details. Thanks again.

PM sent. For other readers, all ordering details are on Page 1 of this thread.

:( Cheers :(

hey mate I am ready now to pay/order .... can I just verify the amount:

73175 Front Springs $169 - 15% = $143.65

73176 Rear Springs $169 - 15% = $143.65

Shocks front $560 - 15% = $476.00

Shocks rear $560 - 15% = $476.00

Adjustable sway bar front $258 - 15% = $219.30

Adjustable sway bar rear $258 - 15% = $219.30

SUB TOTAL $1,677.90

- 5% $ 83.90

TOTAL $1,594.00

Any idea on the lead time for these items? Cheers, Andrew

hey mate I am ready now to pay/order .... can I just verify the amount:

73175 Front Springs $169 - 15% = $143.65

73176 Rear Springs $169 - 15% = $143.65

Shocks front $560 - 15% = $476.00

Shocks rear $560 - 15% = $476.00

Adjustable sway bar front $258 - 15% = $219.30

Adjustable sway bar rear $258 - 15% = $219.30

SUB TOTAL $1,677.90

- 5% $ 83.90

TOTAL $1,594.00

Any idea on the lead time for these items? Cheers, Andrew

PM sent

:domokun: cheers :yes:

Hi guys, my inbox is filling up faster than I can respond to the PM’s. I usually get 30 to 40 PM’s a day. With the current delay in delivery, that has increased to 40 to 50 per day and I just can’t keep up with that sort of volume. Particularly as some of the more technical PM’s take 10 to 15 minutes each to reply to and my available time has decreased dramatically for reasons which will become obvious shortly.

I feel that I need to “broadcast” a Group Buy update until I can clear the backlog of PM’s. Here is the current situation;

1. A little back ground first. As you may be aware Redranger and Whiteline merged a couple of months ago. The first step was a merger of Sales, Marketing and Distribution functions and Whiteline’s Minto premises were simply not large enough to accommodate this. So the premises adjacent to Redranger at Somersby were acquired and that was utilised for the larger, merged entity. Some people have taken this as a sign that Redranger “took over” Whiteline, when that is in fact not the case, it is a true merger.

The Whiteline manufacturing premises at Minto remain. More news on that shortly.

2. How this affects the Group Buys. Many of the products that I specified for the Group Buy Kits are unique, it is what makes the kits “work” better than any other Skyline suspension update. This uniqueness has been possible because of my knowledge of the systems within Whiteline (plus Bilstein, of course). The Redranger merger has disrupted that system and the “unique” (to the Group Buy) parts have not been flowing through as they had previously.

3. The good news. I have been working 14 hours a day, every day, for the last week, including yesterday (Saturday) helping to clear that backlog of orders. As a result, all of the Group Buy orders should be delivered this week. At this point I can’t tell you what day your individual order will be delivered. But as they flow through the system I will inform you of the con note numbers as soon as they are issued (the normal system).

In conclusion, I know you probably don’t care about the reasons, you just want your stuff and that is totally understandable. But I felt I had to give some background and let you know that I am working on clearing the backlog (personally as it happens) so that we can return to our previous prompt responses. Please hang off on the PM’s, I promise you that I haven’t skipped off to Brazil with your money. That your stuff will be delivered very shortly.

:) Cheers :(

Just wondering if this setup would help my car for the 1/4 mile as my car axel tramps and doesnt hook up to well.

Or maybe theres another type of setup, maybe you could help me with (SydneyKid).

Regards

Thx In Advance

Gary, can I get the prices for Front and Rear swaybars delivered to 2177 NSW please? For both fixed and adjustable please.

Fixed are $195 each and $219 each, freight is $10 each.

:blink: cheers :huh:

Just wondering if this setup would help my car for the 1/4 mile as my car axel tramps and doesnt hook up to well.

Or maybe theres another type of setup, maybe you could help me with (SydneyKid).

Regards

Thx In Advance

Plenty of guys use the Group Buy kit for drags, with good success. The spring rates (particularly rear) are OK for that purpose and the Bilsteins control the compression and extension of the suspension perfectly. The usual cause of axle tramp is poor control. Occasionally there is another reason, such as worn bushes, but insufficient damping is the most likely cause.

I used the Group Buy kit in my R34GTT (265 rwkw) for an 11.9 sec 1/4 at 120 mph, so it works OK at that level.

You can go to a more specific drag related set up, such as the one I specified for BU5TER (1.5 sec 60ft). On top of the normal Group buy price, you are looking at an extra $500 for Eibach coils and specifically revalved Bilsteins with coil over conversion.

PM me for more details.

:blink: cheers :huh:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...