Jump to content
SAU Community

1jz 180sx Almost Done

wannaQik180

By wannaQik180,
in Australian Capital Territory

 Share

Recommended Posts

wannaQik180 Apprentice

wannaQik180

Posted
Posted

hey guys.. i know im on the skylines forum, but figured this may interest some of u..

i've spent the past few months converting my 180sx from SR20DET to 1JZGTE... as every nissan enthusiast does, i considered the ole RB25, but at the risk of starting a flame war, didnt go for it, cause it wouldnt be able to handle the power im going for.... much the same at the RB26... altho they r both good motors, for power handling in stock form and price off the shelf, the 1J left them both for dead... but enough on that.... i should hopefully have it all done and on the road in about 4 weeks... took some pics last night, as i finally fixed all the front panel damage from the original accident (that inspired the conversion back in february).

so far, ALL work has been carried out in my garage... engine came with some goodies on it, but everything else has been my own work - mounts, panel beating etc...

when its done, i'll hopefully come along to a meet.... i bought a few bits and pieces from this forum for the conversion, so it'd be cool to meet up with some of the guys i've met along the way again.

cheers

Greg

http://www.nissansilvia.com/forums/index.p...0entry1619357

Link to comment
https://www.sau.com.au/forums/topic/88208-1jz-180sx-almost-done/
Share on other sites
leech_ Grand Master

leech_

Posted
Posted
i considered the ole RB25, but at the risk of starting a flame war, didnt go for it, cause it wouldnt be able to handle the power im going for.... much the same at the RB26...
Fits a damn sight better than an RB. Oh, that's right, cause any RB = poo

and you call yourself a nissan fan pfft. anyways nice car

Bluprint Veteran

Bluprint

Posted
Posted

Very nice conversion, I'd love to see it once it's done

I just had a look at the NS thread, looks like you're going for about 350rwkw

an unopened RB26 (or 25/Neo?) should be able to support that I guess (if you don't flog it everywhere)

But anyways, full points for doing something different, I like it.

wannaQik180 Apprentice

wannaQik180

Posted
  • Author
Posted (edited)

i considered the newer NEO engines, but when i looked at price V's power handling, the 1J won out.... i know its older, but it has been proven time and time again.... plus 700hp on stock internals and a happy redline of 8K....

aim is for as close to 400rwkw as possible on PULP... if i get some more dollars together by the end of the year, i'll see about a NOS kit, but there r plenty more things to happen with it before that.

i have some coilovers ready to go, just have to do the 5 stud and GTR brake conversion.

and yes, i do call myself a nissan fan... ask every one of the ppl i've helped and those who i've done CA and SR engine conversions for... it just sux that in the 2.5ltr class, nothing nissan has can reliably do what the 1J does... not to bag nissan as i loved my CA and SR, but the 1J came out on top for every goal i wanted to achieve - except weight distribution, but i have a 13bT on the way that will fix that :P

also, some of my favourite brown undie moments came from my mates VG30DET silvia, which i spent many months working on.... and my friend in sydney is currently working on another silvia with a VQ.... its not all about CA's, SR's or RB's for me....

.... and LEECH, the quote about RB=poo was not me.... nor do i endorse that narrow minded view... im more than sure there will be plenty of RB's that will hand me my ass and to be honest, i look forward to meeting them.. i know my car will be fast, so it will be a nice change to see an RB that has had money spent on the inside, not the outside.

Edited by wannaQik180
leech_ Grand Master

leech_

Posted
Posted
.... and LEECH, the quote about RB=poo was not me.... nor do i endorse that narrow minded view... im more than sure there will be plenty of RB's that will hand me my ass and to be honest, i look forward to meeting them.. i know my car will be fast, so it will be a nice change to see an RB that has had money spent on the inside, not the outside.

hehe i am just stirrin :D and my bad i just thought the guy posting would have been the owner :P i take back my comment but the guy that said that is a n00b :) j/ks each to their own i guess :P

wannaQik180 Apprentice

wannaQik180

Posted
  • Author
Posted

its all good... and to stir things up even more, im also seriously thinking about a 13bT... i have the parts already and i am very open minded when it comes to conversions, but i dont think i could do it... as it is, the 1J sounds like a deep, throaty rotar at idle.. those cams sound f*cking awesome, but i dont think i could do it... the handling would be sensational, given the massive weight reduction and the engine sitting well behind the x-member, but i dont know..... might just have to wait for Benn to finish putting one in his 200sx.... will be an interesting ride.... 200sx, 13bT, 400+rwkw... but until he gets that done, he'll be spouting off things like RB = poo... i just hope when its done, he does have his ass handed to him (hopefully by me)... bring him down to earth, tho i reckon the price of petrol and $150+ a week should help with that... the rotars may throw out some power, but christ they dont do it too ecconomically...

as for the blood.. i learnt the hard way that when bringing a gear box and an engine together, to keep ones hands well and truly out of the bell housing... especially when ur "mate" is pushing as hard as he can at the other end.

Nathan... how long till ben is finished with ur conversion?? also, we need to do some touch ups to that oil cooler of urs... is more like an oil warmer the way its currently set up :D

  • 2 weeks later...
  • 2 weeks later...
djhatton Proficient

djhatton

Posted
Posted
Is the 1j really able to put out 700 hp on stock internals? I shouldnt really be surprised but that is a lot. How reliable will that be. How does a 2j go comapred to a 1j how hp can they put out on stock internals?

it depends entirely on the tune, but lets just say that neither 1j nor 2j (or most factory powerplants lets face it) wouldn't be holding together for a long time...

the toyota engines are tough as nails, yes, but they're not unbreakable. i'd like to see a 1j with 700hp last indefinately...

d

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • R34_GT to Turbo
      R34 GTR Vspec Garage Sale - All must go!

      By R34_GT to Turbo · Posted

      Hi, wondering if the HKS bar and water reservoir still available? Thanks 
    • Rezz
      Shoota's R33 GT-R RB30/26

      By Rezz · Posted

      What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
×
×
  • Create New...