Jump to content
SAU Community

Recommended Posts

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

Originally posted by Micko

Dont you guys like my taste in music or something?

You must be jealous of my vocal skills:bahaha:

Nothing wrong with the Boss and the Eagles.

Just your rendition of the songs leaves a bit to be desired I am told.:D

Cheers

Ken

Originally posted by 33Spec2

hello niz

aaaaw the picture is gone!:D

vicki its russell lets see if you remember next time i ask you:D

Russell , you must have been the only one to see it.

Bloody too quick these mod guys...

Cheers

Ken

Fair enough - I am a shocking singer - only did it to entertain the crowd...

Hey Ken - ever since I changed the front pipes the fuel consumption has gone through the roof. Is this due to the bit of extra boost being made or would it just be because my foot has been welded to the floor 'testing' the new pipes?

Originally posted by Nizmo

hi russ n micko

Know how u feel Kyles - if it wasnt for the money im earning i would be outta my job as well - just one too many lazy bitchy dickheads there

Found out a long time ago , money isn't everything and lifes too short to be doing shit you don't like.

If you are prepared to have a go and not be afraid of the unknown , then quit .

Cheers

Ken

Originally posted by Micko

Fair enough - I am a shocking singer - only did it to entertain the crowd...

Hey Ken - ever since I changed the front pipes the fuel consumption has gone through the roof. Is this due to the bit of extra boost being made or would it just be because my foot has been welded to the floor 'testing' the new pipes?

prolly the latter.

Have you got the mines puter in ?

Cheers

Ken

its just not nice going to work atm, I got a written warning today for some things i didnt even do. And I have to take some time off coming up beacuse of medical stuff and she was really unreasoable and really not understanding or supportive at all... And everyone else seems to have no problems getting time off for medical appiotments or things like that atm .. but im made to feel bad about it when i ask. Not my fault.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...