Jump to content
SAU Community

Recommended Posts

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

Yeah paul - course I was happy:D

Will organise to go down again next wednesday & get steve to put a bleeder on to see if we can raise the boost down low (the factory solenoid doesn't tend to hold it too well above 12psi so I'm told).

After that I should be over the magic 300 mark so I will be even happier:D

Originally posted by Adrian_perth

i gonna pick it up tommorow, so all those that ordered cam gears hopefully you can be expecting an sms or phone call form me tommorow :P now to go an to some late night work on my car, re: fit blow off valve!

adrian :(

BTW , because I can't be assed reading back , how much did they end up being?

I got a set of JUN gears for the R and just trying to ascertain whether they were a good price.

Cheers

Ken

Wowow that was fun, 1 hour to get from leach to canning!!!!!!! bloody freeway i wish i could allow myself to break roadrules. I saw this girl in a red excel drving down the emergency lane talking on her phone and the cop next to me didnt do shait!!!

Hello, how iz all this windy morning?

Huh, 4th time broken into in 2 months last night! Smashed the sliding door AGAIN then decided that the VN looked alrigt so tried to get in (broke door lock completely) set the alarm off and bolted.

So yeah, already seen cops and all this morning. Hay, at least this house is eventful!

Guest
This topic is now closed to further replies.



  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...