Jump to content
SAU Community

Recommended Posts

hey riaz, im back

Yeah i know about the number kms ect but i dont really care just wanna get it working some time in the future for now, I want to get my headlights fix, and back light fix, along wit the brake light in the Wing?

Did u find out about the part? i had alook at tring 2 open it but it doesnt look like it is glue togother and i didnt want to crack it

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

its too hard to explain over the phone so you gotta take it to autoworx along with the LED unit, which unscrews from the wing. and then you gotta heat it up and then open it,

and then reseal with sikaflex etc. but thats the cheapest way to fix it as they are expensive

not to sure yet, as im still looking at what to get, ken can get me a set of aus spec coilover for around $2,000, but i might just get aset of HKS HyperMax II as they around only $1,700 and with the shipping/gts ect it should only be alittle more than the aus spec ones, but im also going 2 look at the apexi ones 2

hmm so your p roject will basically be $1000 for the car $4000 for body repairs $2000 for spray

$2000 for Sr20

$5000 of labour and small things required for conversion

$1200 for wheels

yeah you will want to be driving that on the weekend from the look of it.

and your line will still beat it.

I think coilovers are major overkill especially when paying new prices for them,

paul might even have a shock sitting round for like $30 thats a better way to go.

i mean with your project car and all. Do you own mcdonalds by any chance??

your front lights arent in place right because they have been sikaflexed in place but whoever installed it originally.

so if you want to heat it up or cut them out and then mount them again, feel free, but i can tell you know its alot of messing around.

i would have done it, but its too much fiddling and also wiring the lights etc was all too much to do after all the stuff i did to make it presentable and clean and neat

riaz, its a project car which means it doesnt have 2 be ready untill along time away. I want to get the coilover 1st before anything else.

Im looking to get the a86 in about 3months do alot of the work myself and learn on the car.

I just wanna get the coilovers, with hieght adj. so it kind of solve 2problems

not to sure yet, as im still looking at what to get, ken can get me a set of aus spec coilover for around $2,000, but i might just get aset of HKS HyperMax II as they around only $1,700 and with the shipping/gts ect it should only be alittle more than the aus spec ones, but im also going 2 look at the apexi ones 2

$2000 isnt much for u?

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Only if you do not You will not be able to drive it with any serious load without risk of it pinging, which will either slowly or rapidly kill it, depending on how bad it is.
    • Hi guys, I’m new to the GTR scene. Picked up an R33 GTR earlier this year that needs a lot of love. I’ve been going through the hot side, changing all the gaskets and while it was all off I managed to score a set of -9s. It still had the stock ceramics so I was pretty happy to get the 2860s.  I live in a small country in the pacific with 0 performance car scene. No dyno’s no performance parts, let alone stock parts for a skyline. I order everything from Australia and do it myself. This means I’ll be running the stock ECU. Maybe down the track I’ll get an aftermarket set up and do a remote tune.  Will the car run -9s on stock tune safely?  I have a very heavy foot so I really hope so 😂   thanks guys   
    • perfect, no rush to address the leaking bush then, it's not doing much/anything
    • I'm not sure if it will bolt up, but.... I'm reasonably sure that the ID of the runners is somewhat smaller on the NAs. So it probably wouldn't be a good match at the flange where the top and bottom meet. So that would be a reason to not do it. And the skinny runners would be the bit you're keeping, which would be a reason to no do it. You'd want the big runners if you were doing any work to swap stuff. Why not just use what you've got, like nearly everyone else who has +T'd an NA? You don't need or want the TCS throttle or other stuff that is specifically DET inlet/crossover.
    • lol already been put in temporarily 3 years ago
×
×
  • Create New...