Jump to content
SAU Community

Recommended Posts

Hey guys. I've had a look around and this sounds like a unique problem to me. I've got this R33 and the battery keeps going flat.

I purchased a new battery and got an electrician to look at it, he said it had a bad earth.

Now, after about 2 days from driving it, the battey is as flat as a tack, and the alarm is trying feably to sound, but it sounds more like a magpie giving birth.

The same sparkies have had another look at it, say it's not draining from the battery, there's no discharge at all, yet the battery still goes flat.

They removed the alarm and put another new battery in it, hoping its something to do with the alarm, but alas, the battery still went flat over the weekend.

If anyone has had a similar problem to this, or is as stumped as me, give us a yell so i can tell the sparkies what to look for,

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/88482-electrical-problems/
Share on other sites

Did the sparky check the alternator?

yeah that's fine too. it charges the battery fine, just something else is discharging it.

the sparky hooked an ameter up to it overnight once and said nothing was draining from it, but 2 days later it was flat

I Had this problem to but I got it fixed it cost me $320 to find the problem.

Its was 2 relays on the passenger side under the dash and they would not turn off when you turned the car off which the ECU should turn off but wouldn't, so its some fault with the ECU we had to rewire the 2 relays so they were hooked up to ignition or ON on the key column I cant remember which.

but that should fix it for you

the sparky hooked an ameter up to it overnight once and said nothing was draining from it...

You don't need to wait overnight. If something is draining the battery, you will see it immediately.

Check the boot light is turning off properly (although I would expect it to take a bit longer to discharge the battery).

I Had this problem to but I got it fixed it cost me $320 to find the problem.

Its was 2 relays on the passenger side under the dash and they would not turn off when you turned the car off which the ECU should turn off but wouldn't, so its some fault with the ECU we had to rewire the 2 relays so they were hooked up to ignition or ON on the key column I cant remember which.

but that should fix it for you

The sparky found the problem today, it was this exact thing. I've had the ecu rewired and now it's working fine. thanks a lot for the help guys, i'm glad to have this problem finally fixed

Well it took them a while to find the problem, so it was $300 in labour, but if you told them first up what it was, they could fix it pretty quickly, i would say less than an hour labour

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...