Jump to content
SAU Community

Recommended Posts

I had my car checked out by them, cost 330 or so, not sure if thats becasue they had to get some1 that knew about imports, or because they checked it at a house.

Either way they did an ok job, i picked up a few things they didnt after, though all in i think it was worth it.

If i had to do it again, knowing what I do, id opt to pay my mechanic to check it over...

Link to comment
https://www.sau.com.au/forums/topic/8894-nrma/#findComment-131195
Share on other sites

Yeh you see the problem is I dont have any mechanic that i know who knows stuff about skylines well.... I've been offered by a few guys on the board help but im thinking of getting the nrma and a persons from the board or one of their mechanics to check it out so that way i cant lose....u never can be too safe!!

Im willing to spend the money to get quality!!

Link to comment
https://www.sau.com.au/forums/topic/8894-nrma/#findComment-131278
Share on other sites

You want to buy a Skyline locally? $330 sounds like a lot. You might want to get some people here who know what to look for to give it the once over...

When I got my Skyline from the ship I had some mates go over it and give me a sorta inventory of what's on it and what needed to be fixed.

T.

Link to comment
https://www.sau.com.au/forums/topic/8894-nrma/#findComment-131286
Share on other sites

I had one as well, $275 about 2 years ago.

Cheap insurance. They may not 100% on the all the electrics etc, but they can sure spot repairs etc, and most of the guys who are doing inspections are quite capable mechanically.

Link to comment
https://www.sau.com.au/forums/topic/8894-nrma/#findComment-131395
Share on other sites

hey Guy's,

just speaking from personal experience, but my view is that unless you're after basically a visual check, i would not be getting an inspection done. About 3 years ago when i was looking at buying a particualr GTS25t I had an inspection done on the car I wanted. The price was about as high as you guys have allready stated and the guy was test driving the car for well over an hour. His verdict was that the car was bordering on excellent. Of course he pointed out all the scratches etc etc. Following this I let the importer know that I wanted the car, and 2 days later I got a phone call from the broker saying that the car was at it's warranty check and was only running on 5 cylinders. This was not picked up by the NRMA guy in anyway shape of form and when I called to ask why it was missed, his response was " we don';t have x-ray vision to look inside engines". My advise is get a trusted mechanic that is known to you.

Link to comment
https://www.sau.com.au/forums/topic/8894-nrma/#findComment-131760
Share on other sites

When I sold my last car the buyer had it inspected at BD4's in Sydney. They did a pretty good job, not sure what they charged but went right over the car, engine, drive train, you name it. Getting it done at a workshop meant they could put the car on a hoist and the mechanic also drove the car with us in it to test it on the road. Verdict.

"mate cars in good nick apart from being BLOODY LOW"

:P

Link to comment
https://www.sau.com.au/forums/topic/8894-nrma/#findComment-132019
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...