Jump to content
SAU Community

Hks Manifold Rb20/25 & Hks Wastegate

jaik
 Share

Recommended Posts

jaik Mentor

jaik

Posted
Posted (edited)

Folks,

I have a HKS Cast Manifold for RB20/25 forsale along with a BRAND NEW unused HKS 40mm Wastegate. Both items are genuine and not those knock off cheapies.

The manifold has a T3 flange and has the wastegate outlet ontop of the central collector. Arguably one of the best cast manifolds available on the market for the RB series of motors. The wastegate is 40mm and is brand new with all gaskets and mounting flanges. There is also brand new stainless allen key head bolts included for mounting this to the manifold. A fantastic combination and its a regrettable sale.

Manifold: http://www.sido-takushi.com/mods/hks_manifold/

Wastegate: http://www.sido-takushi.com/mods/hks_wastegate/

Looking for $900 plus post for the lot.

JK

Edited by jaik
Link to comment
https://www.sau.com.au/forums/topic/89302-hks-manifold-rb2025-hks-wastegate/
Share on other sites
cordiapower Collaborator

cordiapower

Posted
Posted

Anyone interested in this kit as i bought this for rb25 and found out today it doesnt suit rb25 as it sits too low and there is not enough space for turbo as its made for rb20, so if anyone is interested its still for sale...

Kit was sold not 10 mins after I posted it!

Sorry guys,

JK

jaik Mentor

jaik

Posted
  • Author
Posted

Actually it is for rb25 too, the engines place the exhaust manifold iin the same spot. Your turbo must be huge because hks sell this mani in a kit with a t04e and it fits fine. by the sounds of it you need to go highmount.

ECR033 Mentor

ECR033

Posted
Posted
Actually it is for rb25 too, the engines place the exhaust manifold iin the same spot. Your turbo must be huge because hks sell this mani in a kit with a t04e and it fits fine. by the sounds of it you need to go highmount.

So if what you're saying is right, something the size of a GT30 should fit no problems on this manifold on an RB25?

If so, then I may be interested - where are you located cordiapower?

cordiapower Collaborator

cordiapower

Posted
Posted

Mate my turbo cant fit either and is similar to gt30, its manifold made for rb20 as those engines sit higher than rb25...anyone with rb20 this will be great upgrade, unfortunately it cant be used on rb25

So if what you're saying is right, something the size of a GT30 should fit no problems on this manifold on an RB25?

If so, then I may be interested - where are you located cordiapower?

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...