Jump to content
SAU Community

Recommended Posts

I was driving home about 10 minutes ago and I gave it some stick, (in the legal speed limit of course) and all of a sudden my car started to sound almost like a WRX.

Even when it's idling and I tap the pedal.

And it had lost a lot of power

There was no smoke at all and temps where all normal.

My car is standard apart from a zort and panel filter, and 10 PSI boost.

It's a 1991 model with 140KMs on the clock.

The motor it self is only about 33,000 KMS old.

Making 221Killowatts at the rear wheels.

Also the mechanic noticed oil was leaking from the back of the second turbo which was due to be repaired with in the week.

I’m not that experienced with GTR's so this is a bit of a worry to me as I have not long owned the car.

Any help would be great.

Edited by Zardos
Link to comment
https://www.sau.com.au/forums/topic/89584-havung-some-trouble-with-my-gtr/
Share on other sites

Well, if you are really worried about the motor you need to do a compression test. But probably the easiest place to start is to pull the spark plugs and replace any that look fouled. If you have a compression gauge you can check that at the same time.

yeh happened to me too! was driving, then all the sudden car was sounding that a wrx. i thought it was mad at first but realised it lost alot of power n didnt feel the same. did compression test, found out one of the spark plugs was gone, so it was pretty much running on 5 cylinders..

yeh happened to me too! was driving, then all the sudden car was sounding that a wrx. i thought it was mad at first but realised it lost alot of power n didnt feel the same. did compression test, found out one of the spark plugs was gone, so it was pretty much running on 5 cylinders..

What number cylinder died on you?

When i change my coils i am going to also change my turbos. One of my turbos is leaking oil, (second one) which are still under wantry so iam going to get both checked and if needed get both re-built. Which iam going to sell them because i am going to get a pair of N1's and change ECU while iam at it..

If any one is interested in buying them PM me...

What number cylinder died on you?

When i change my coils i am going to also change my turbos. One of my turbos is leaking oil, (second one) which are still under wantry so iam going to get both checked and if needed get both re-built. Which iam going to sell them because i am going to get a pair of N1's and change ECU while iam at it..

If any one is interested in buying them PM me...

it was the third cylinder... thats wat the compression test showed...

well when i had those checked out, i also found a rattling sound inside the engine. apparently tensioner was worn out n loose, needed replacing. also i had to change one of the cams coz it was cracked and change timing belt. these cars man... haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...