Jump to content
SAU Community

Recommended Posts

I was driving home about 10 minutes ago and I gave it some stick, (in the legal speed limit of course) and all of a sudden my car started to sound almost like a WRX.

Even when it's idling and I tap the pedal.

And it had lost a lot of power

There was no smoke at all and temps where all normal.

My car is standard apart from a zort and panel filter, and 10 PSI boost.

It's a 1991 model with 140KMs on the clock.

The motor it self is only about 33,000 KMS old.

Making 221Killowatts at the rear wheels.

Also the mechanic noticed oil was leaking from the back of the second turbo which was due to be repaired with in the week.

I’m not that experienced with GTR's so this is a bit of a worry to me as I have not long owned the car.

Any help would be great.

Edited by Zardos
Link to comment
https://www.sau.com.au/forums/topic/89584-havung-some-trouble-with-my-gtr/
Share on other sites

Well, if you are really worried about the motor you need to do a compression test. But probably the easiest place to start is to pull the spark plugs and replace any that look fouled. If you have a compression gauge you can check that at the same time.

yeh happened to me too! was driving, then all the sudden car was sounding that a wrx. i thought it was mad at first but realised it lost alot of power n didnt feel the same. did compression test, found out one of the spark plugs was gone, so it was pretty much running on 5 cylinders..

yeh happened to me too! was driving, then all the sudden car was sounding that a wrx. i thought it was mad at first but realised it lost alot of power n didnt feel the same. did compression test, found out one of the spark plugs was gone, so it was pretty much running on 5 cylinders..

What number cylinder died on you?

When i change my coils i am going to also change my turbos. One of my turbos is leaking oil, (second one) which are still under wantry so iam going to get both checked and if needed get both re-built. Which iam going to sell them because i am going to get a pair of N1's and change ECU while iam at it..

If any one is interested in buying them PM me...

What number cylinder died on you?

When i change my coils i am going to also change my turbos. One of my turbos is leaking oil, (second one) which are still under wantry so iam going to get both checked and if needed get both re-built. Which iam going to sell them because i am going to get a pair of N1's and change ECU while iam at it..

If any one is interested in buying them PM me...

it was the third cylinder... thats wat the compression test showed...

well when i had those checked out, i also found a rattling sound inside the engine. apparently tensioner was worn out n loose, needed replacing. also i had to change one of the cams coz it was cracked and change timing belt. these cars man... haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...