Jump to content
SAU Community

Recommended Posts

Is the final concept of the GTR going to be released at tbe Tokyo Motor Show?

Yes there certainly will be a GT-R Concept at the Tokyo show. Had a photographer I know confirm this the other day. He's been asked to take pics at the show and do a photo shoot afterwards. Can't wait to see it.

1a.jpg

NISSAN AT THE TOKYO MOTOR SHOW 2005 – GT-R PROTO

At a glance:

Ultimate driving pleasure

Exterior design close to final

Official launch set for 2007

At the 35th Tokyo Motor Show in 2001, Nissan unveiled the GT-R Concept, confirming that the GT-R legend would be continued into the 21st century. Then, at the 37th Tokyo Motor Show in 2003, Nissan announced the next-generation GT-R would be rolled out in 2007. Now with the launch of the production model just two years away, the development of the new GT-R has moved ahead again with the reveal of the GT-R PROTO.

Ultimate driving pleasure

In essence, driving pleasure means that a car responds faithfully to the driver's wishes and performs precisely as expected. Successive generations of the GT-R have consistently pursued this vision of ultimate driving pleasure. Whether on the road or the racetrack, the GT-R has always represented ultimate performance combined with handling qualities that stay faithful to the driver’s wishes, in all conditions. As a result, the GT-R has built a reputation that extends far beyond just its loyal owner base.

Exterior design: pure performance

The design of the GT-R PROTO expresses pure GT-R heritage, coming from the first model PGC10 (1969) through R34 (1999), in a new and expressive form.

From its original roots as a pure-bred Japanese performance car, the new GT-R will now be a car sold globally, recognising its ability to compete with the very best in the world. For the first time in its history, the new GT-R will be designed as a specific body-style, and not derived from a sedan.

The design language of the GT-R PROTO is expressed by a distinctive body-style that communicates pure performance and functionality. The form of the GT-R PROTO instantly expresses its purpose and potential, but in a way that is unique to this iconic car.

At the front end, the single centre air intake is designed to optimise airflow and to strongly link the identity of the GT-R from R34 to GT-R Concept (2001). Front fenders are uniquely designed through intensive analysis of the airflow around the tyres and the air vent behind the front fender also optimises aerodynamics. The sides of the body are sculptured towards the rear fender, expressing the power and dynamic tension of the car.

The overall shape of the body combines solid and smooth surfaces to achieve the look of a well-trained athlete. The unique C-pillar crease is designed for optimum aerodynamics, reflecting the racing DNA of the GT-R.

The rear of the GT-R PROTO is strong and well defined. The signature four ring-shaped tail lamps provide an immediate visual link to previous GT-R models. Four large-bore exhaust pipes complete the purposeful look, which could only be that of a pure GT-R.

The GT-R PROTO provides for the first time a clear indication of the final design direction for the production model to be launched in 2007, the first all-new GT-R in eight years.

Some of the next gtr hunting internet nerds say this is a teaser from Nissan.

Edited by CircusMonkey

The American fanboy hype surrounding 'THEIR' new GT-R has surely put me off ever being interested in finding out new info again... I mean seriously, it seems as if 80% of the traffic at 'GT-R themed' websites is through 16 year old US kids out of Fort Worth, Texas or something.

Just wait until the TMS and all will be revealed. I can already assume that:

90.85% of respondents will yell 'OMG what a piece of sh*t!' at first sight of the next GT-R

36.75% of respondents will ask 'Ok, but whats the part number of the front upper control arm???'

59.88% of respondents (from UK;)) will say 'Rightio then, but don't believe anything until they arrive at the dealership'.

And 99.99% of respondents will say: "It's not a real GT-R like the R34"...

Well thats all from me on the matter. It was quite interesting following the trail of 'spy magazine' info leaked years before concepts were released, but now it's come down to Nissan just doing things in their own time, and for US fanboys to calm down... it's just a freakin car.

I'd have to say that im very impressed by those early portraits. However I do agree with earlier posts which state, that it won't be a true gtr in the sense.

For one, our iconic car is going global, which means it will most likely be tailored to suit American tastes, and for the first time, they are going to slot a VQ V6 under the bonnet. I don't know about you, but working on the twin turbo arrangement on that thing would be an expensive nightmare. Look at what people have gone through with those arrangements on the 350z.

It looks like a fantastic car. To be honest though, I think it will go down as a fan boys supercar and not a diehard skyline fans pride and joy.

if you were an american fanboy, how pissed off would you be if it came out as an "infiniti GT-R" instead of a JDM tyte Skyline?

I personally think it looks like arse, but to people in the states where a skyline GTR is forbidden fruit, and the closest thing you can get to it is a G35 or a $80,000 R32, it'll probably be welcomed with open arms.

The GTR's of the 90's has always been a poor man's supercar when compared to the global market (even though it dominated the Japanese market), so Nissan would wanna improve that image with this release.

in any case, press release about the TMS and Nissan's involvement

NISSAN TO PRESENT EIGHT VEHICLES AT TOKYO MOTOR SHOW

Displays include GT-R PROTO and Pivo electric car concept

TOKYO (Oct. 7, 2005)--Nissan Motor Co., Ltd., will present a total of eight show vehicles at the upcoming 2005 Tokyo Motor Show, including five concept cars, that incorporate new and exciting ideas for models to come. The five concept cars include the "GT-R PROTO," which gives clear design direction for the next-generation GT-R, "Pivo," an imaginative, compact electric car, and "Foria," a compact coupe that combines powerful styling with elegance.

Nissan's exhibit is built around three themes - "Driving Pleasure," "Modern Living," and "Innovative Technology." "Driving Pleasure" refers to Nissan's philosophy that all vehicles should be enjoyable to drive no matter what size or shape. "Modern Living," is a new Nissan concept that stresses advanced design value in cabins, while "Innovative Technology" refers to Nissan's emphasis on technologies that meet the needs of customers, while reducing the burden on the environment.

Overview of Major Exhibits

< Concept Cars >

GT-R PROTO

# Ultimate driving pleasure

# Provides clear indication of final design direction for the production model to be launched in 2007

Pivo

# User-friendly three-seater commuter with future electric powertrain technologies

# The cabin can be rotated 360 degrees thanks to drive-by-wire technologies, eliminating the need to reverse

# Advanced technologies such as "See-through Pillars" and "Around View Monitor" help reduce blind spots

# New human-machine interface (HMI) "IR commander" allows driver to control audio and navigation systems and air conditioner by pointing finger(s) to the dash-mounted infrared camera

# The electric powertrain matches the Nissan-developed compact lithium-ion battery and Super Motor achieving zero emissions and enabling a compact vehicle packaging

Foria

# Compact coupe concept founded on performance, quality, and elegance

# Packaged as a rear-drive layout compact 2+2 coupe configuration

# The exterior styling combines power and elegance. Also features center opening B-pillarless doors for easy access to the rear seats

# Interior styling reinforces the car's dynamic performance, with accent on elegance, featuring mechanical instruments and crafted interior material

Amenio

# A multi-people carrier with all-round versatility

# One step further for Nissan's "Modern Living" concept

# Contrast of relaxing living-room-like interior and functionally designed cockpit for driving experience

# Advanced telematics, including "Earth-browsing" and "Space-browsing" capabilities

Note inspired by adidas

Note intermixed with culture fashioned by Tokyo's young people

# Car plus sportswear fashion for the "Remix Generation"

# Projects an atmosphere inspired by multi-sports brand "adidas"

# "Wearable" interior and exterior: Users can change the surface treatment on the front/rear bumpers. Interior fabrics and rubber materials used on dashboard, door trim, etc.

< Preview Cars >

Wingroad Preview

Stylish and functional compact wagon with versatile space and utility

Bluebird Sylphy Preview

A luxury medium-sized saloon reflecting Nissan's "Modern Living" concept

Moco Preview

Concept of car as "my best friend"

< Major Technology Exhibits >

# X-TRAIL FCV (2005 model) cutaway model

# Interactive display on key technologies featured on "Pivo" concept

# Environment displays including cutaway models of the new MR20 4-cylinder engine + CVT and renowned VQ35 V6 engine + CVT

# Panel display on safety explaining Nissan's "Safety Shield" approach

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...