Jump to content
SAU Community

Recommended Posts

*pulls hair out*

this has been covered heaps of times... do a search!!

yes this is the naturally aspirated section, so he wud be obviously quoting the 25de

and yes its around 100-110rwkw depending on dyno.

and yes thats a stock'ish figure (maybe pod and/or cai at the most)

and yes its for a black r33

and yes its true black r33s are faster than the pink ones

and yes this can all be found in a search...

kthnxbai

p.s:

Does anyone know what the power output is for a stock R33 GTS (RB25) is? Had an argument with a couple of mates today on who'd win at the end of a standing quarter/kilometre, my R33, a VL (non turbo) or a 4L EB Falcon?

max power output does not necessarily mean fast times...

and a quarter/kilometre is only 250m...

and if your standing, then i guess you win...

so what is it your actually trying to ask?

less talk, more timeslips....

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1626044
Share on other sites

*pulls hair out*

this has been covered heaps of times... do a search!!

yes this is the naturally aspirated section, so he wud be obviously quoting the 25de

and yes its around 100-110rwkw depending on dyno.

and yes thats a stock'ish figure (maybe pod and/or cai at the most)

and yes its for a black r33

and yes its true black r33s are faster than the pink ones

and yes this can all be found in a search...

Dude, no need for the freakin' sarcasm...

I tried a search, any thread with a mention of '25' or 'RB' or 'power' comes up, equating to about 70% of the site. Isn't the whole point of a forum for those who have relevant knowledge to share it with thse who don't, and want to learn?

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1627970
Share on other sites

the knowledge is there, its been shared - i know because i have personally posted a dyno graph of my stock R33 can you imagine that forums will be filled full of rubbish if every 2nd person wanted to know the power of their RB, the 1/4 mile times their car should run and their rice rating?

i may have been overly crude, but it took 20 minutes for your question to be answered by redemblem...

and it took me less than 20 seconds to find these:

http://www.skylinesaustralia.com/forums/in...=88879&hl=power

http://www.skylinesaustralia.com/forums/in...c=81666&hl=rwkw

http://www.skylinesaustralia.com/forums/in...c=74293&hl=rwkw

http://www.skylinesaustralia.com/forums/in...topic=25301&hl=

(you do the maths)

kthnxbai

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1628568
Share on other sites

  • 3 months later...

go and get boned EUG cause you obviously need to get layed. Maybye your hairdressor boyfriend with his gold supra can pick you up and you can jerk him off.

Then you might take this a bit less seriously? what, you making money from this site and this is really bothering you?

Stop being a queer, or youll end up being one of those cranky old people in a unit complex complaining about noise or rubish.

fag

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1868078
Share on other sites

you are 3 months late dude.

and what's with all the sausage talk? you are obviously the one with the complex about penises (omg i said penis) and homosexuals.

kthnx

oh p.s - i have said that i may have been overly rude... so take that penis out of your butt and let this thread die along with the other 500 threads about the power output of that penis in ur butt...

oh wait.. i'm starting to sound like you... hmmm... sorry

on a serious note - how many others would search and find this thread looking for their answer? my money is that next month another one will post asking for dyno/quarter mile answers for their car... and the simple solution will be to actually take their car out and do the run and find out for themselves.

so drop it ross - cos as i said before i do have a thread in the NA section with dyno charts and power outputs and the mods that i had done - and if ppl learn to search for 20 seconds they can possibly have their questions answered based on my experiences.

now that you see my point of view and completely understand where i'm coming from - lets be friends, but straight friends cos i'm into girls =)

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1868332
Share on other sites

Yeah, ok. Just like stiring people up that winge. I must have got to you a bit. You wrote a pretty big reply. hahahah. Ill learn to live without you my friend. I might even jump the fence and smash a fat girl from the country or something then ill drive her home in my ""turbo"" skyline. haha. later buddy

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1868598
Share on other sites

BAHAHAHAHAHAHAHA sorry I found that one Kinda Funny and since Your ONline and all I hope you won't Mind answering what P/Output i would Get with Cpld air induction/ rb26dett Hex throttle Setup GTR plenum Chamber Upgrade Or any other Bright Ideas You might Have for some RB25 NA goodnes :)

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1868609
Share on other sites

I have a 25det but, I would ditch the plenum idea go with what you said. Also upgrade injectors and pump and get a motec or power fc engine management.

Plenums even on my turbo 25 are really a bit of a gymock and dont offer much in the way of performance until you have big power allready (400kw+).

cams, head work. Are you on your p's? If not just swap motors with a turbo 25det.

you will be strugling to get the perfrmance of a turbo one without blowing too much money.

Rather than waste the money modding it, if thats the case save for a 25det or go all out and get a rb26!

hope that helps,

laters

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1868741
Share on other sites

My cousin owns a stockish gts25 r33. with zorst & hi-flow apexi panel filter

From what I've seen it has a decent launch, but later the commodores & falcons creep in front due to the 2.5L displacement versus a 3L+ engine

Thank god the rb25de is twin cam, it's a godsend for the n/a :rofl:

I wonder how a NEO engine would perform?

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1875319
Share on other sites

Yeah Im on my P's still Not that i care I been Driving alot longer than Alot of people on the road and Have already Built up strong turbo cars But lately I cant get enough of that NA goodnes hence this new buildup and me ae71 buildup reved out to 10 grand today on the way Home from work :D

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1878395
Share on other sites

the knowledge is there, its been shared - i know because i have personally posted a dyno graph of my stock R33 can you imagine that forums will be filled full of rubbish if every 2nd person wanted to know the power of their RB, the 1/4 mile times their car should run and their rice rating?

i may have been overly crude, but it took 20 minutes for your question to be answered by redemblem...

and it took me less than 20 seconds to find these:

http://www.skylinesaustralia.com/forums/in...=88879&hl=power

http://www.skylinesaustralia.com/forums/in...c=81666&hl=rwkw

http://www.skylinesaustralia.com/forums/in...c=74293&hl=rwkw

http://www.skylinesaustralia.com/forums/in...topic=25301&hl=

(you do the maths)

kthnxbai

HHAHAHAHAHAH EUG!!! you are my new Spokesman :)

yeah my R33GTS-4 only make 104kw on 4WD Dyno :P

Link to comment
https://www.sau.com.au/forums/topic/90144-rb25-power/#findComment-1884582
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...