Jump to content
SAU Community

Recommended Posts

just wondering if anyone has mounted a sub in the centre of the rear seat (flush) of a R33?

a mate of mine once had a 12" mounted in the rear seat of his vr comodore and it sounded great! also it didnt take up any space in the boot ect

u can try, if u want to put it in the centre then u have to move the "rear fuse/relay"box it takes alot of shuffling around, i have tried and i just settled to take out the sheet of metal to let more bass through plus add metal grill on my arm rest (4-door skyline).

well i was wondering if anyone has done it and thaught they might be able to let me know what they came across in the way of problems doing the job, ive had a good look at it and it looks quite plausible

im really suprised that knowone has replied sayn they have done it yet, i dont know heaps about sound systyms but i dislike boxes in boots as they take up room and for mine its like you may aswell put the sub in another car because the boot is a sealed erea

a freind of mine once had a vr comodore with the sub in the centre of the rear seat and it was awsome, it didnt take up too much space, it looked awsome and sounded even better!

i have also seen one in a car wich had a sealed box around it (in the boot) and ports going thru the parcel shelf?

maybee you need a certian sub to get the right effect? i was considering the alpine type R

do you install sound systyms fhrx?.... does my idea sound silly to you??...lol

Dave

Edited by r33freely

You know, I've never actually thought of doing this to a skyline.. I'm about to put in a sub, sounds like a good idea.

If any1 with any pics of setup etc would be able to post some.. Would be very very appreciative.

Yes, better sound in the boot. i have a Pioneer 121spl 12" sub in a ported box in my boot. sounds great compared to a mate who has one pointing into his car in his VT.

The things with the commodore is that the middle seat folds down (they dont in skylines do they?) which makes it easy as to just by a sub in a box and just throw it in. Yet i had to get a custom box made for mine to sit over the diff hump. its nothing fancy but it does the job.

damn, and i thought i was gonna be original with it in my r32, :(

r33freely, have u heard of pioneers new shallow subs.. the use like a super magnet, and apparently they were made for this very sourt of thing, on the pioneer site they have a review on it, and like how it was designed for utes/cars with shit all space..

its worth checking it out,

as for the instillation, id love to help, but i have NFI on how its done :D

i also would love to see pics posted of anyone who has put this idea into reality...

cool!, grim05.... ill check it out!!

dont worry im dead keen to do it because there is no way known im filling my boot up with 300kls of shit!!

and i will have pics up as soon as its done but i know it wont be for a while yet

i am talking to some trimmers to see what they think cause im sure i can mount it all but the trimming ect isnt my speciality!!

Dave

  • 2 weeks later...
  • 1 month later...

f**k YEAH!! nice work man, thats fkn sick!! nice ouch with the xbox to, i got mine modded so i have like 40 games on it, which would make it ideal for placement like that :D

but yeah, thats fkn sick, is that the skull from wildboys?

Mounting a sub in the rear seat will never get you the same sort of sound as if you mount it in its own box. The reason for this is that you can tune a sub box to suit the characteristics of your sub. Most subs state an 'ideal' enclosure volume. They range from 0.5 cubic foot to 1.5 cubic foot. Your boot (probably about 3-4 cubic foot) is definitely not small enough to build decent reverberating pressure that would allow the subs to sound really great.

If your boot space means that much to you though, go for the rear seat install. Just be prepared to be disappointed if it's not done properly though. You will easily get 4-5db more out of a well built sub box (this is a lot in sound terms).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...