Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Do you have a fuel pressure reg?

How do stock injectors induce the 'lag'? Would be good to know what duty cycle your hitting - you don't have a h/c?

252rwkw sounds pretty close to what i made on stock turbos. Do you have adjustable cam gears?

No i dont have a regulator or hand controller unfortunately.. the inducing lag bit didn't come out quite right. My tuner said basically if there could be more fuel put in down low it'd spool it up quicker, but the stock injectors are pretty close to their limit and pushing them closer would be living dangerously. So, if I did the fuelling upgrades im sure we could get it spooling quicker, how much quicker I got no idea.

Yeh got HKS cam gears..don't think they were adjusted with latest tune for new turbo's.

I can't see how you can be at 100% duty cycle down low? that doesn't seem right. i can see them being at 100% at 8000rpm, but not at 3000 to 4000? I could be wrong though.

I can't see how you can be at 100% duty cycle down low? that doesn't seem right. i can see them being at 100% at 8000rpm, but not at 3000 to 4000? I could be wrong though.

Exactly my thoughts. I don't know much but i would assume at 4000rpm, they only have to fire half as much as they would at 8000rpm. From what i have seen, injectors usually max out up the top of the rev range.

We need someone more knowledgable to answer :angry:

Fuel pressure reg should help get a little more out of the injectors. Only a couple of hundred bucks.

the gearbox can handle more power than that. just don't abuse the gearbox and don't put a solid centre clutch in it, i know from expereince :O

i know that gtr gear can handle more power....but jono think that his gear box is stuff...cant run....

Jerry: any idea what the difference would be between your setup and GTR032? Just tune or something else?

Well , i have a 34 engine , almost new , tune of course is different well under 12-1 at 11.5-1 , i wont run 12's on a stock engine .

I dont have cam gears or dump pipes but the 34's have s/steel dumps not cast and i have 550 injectors , the other thing mine will only make 240 awkw .

I'm not after big power in my setup , i just want a quick street car not big dyno numbers .

I did 11.8 @ 118 mph a couple of weeks ago with a bit left in her still , i'm happy the way she goes as i have plenty response , almost like a stocker and 34's are more responsive that 33's and 32's (if all 3 are stockers ) .

Actualy if i had steel wheel turbos i wouldn't bother with the gtss's , thats the reason i tried to buy an NUR M-SPEC , maybe next time !

Gtss's are not cheap but in my opinion ideal for a stock engine but stock injectors would be right on the limit , thats why i went for the Nismo 550's ( again not cheap , you can get sard much cheaper ).

Can injectors have anything to do with lag like GTR032 mentioned earlier in this thread?

Why are 34's more responsive than 33's and 32's stock?

No they shouldn't have ,as they supply all the fuel needed, i dont know if the cams are the same in the 3 cars , so that maybe one reason , different turbos is another and who knows they may run more timing as well as better dump pipes . Ports and valves i think are the same but i never had a 34 head off the car so i cant say for sure , i'm only going on what others have told me . I know from experiance they run more boost .

Are you going the gtss road Andrew ?

All you need is the turbos ,dumps, power f/c, ebc and 550 injectors , as long as you have a good donk ( do a compression and a leakdown test to confirm ) and you will have a much quicker car and almost as responsive as it is now .

GTR032: how is your car going anyway?

I had the pleasure of being a passenger in it for 1.5hrs the other night and I must say that it drives very well. It has better response/power under 3000rpm than my R33 GTS-t did with the stock turbo B)

Yep turbos and pfc are on thier way.

GTR032: how is your car going anyway?

Car's going pretty good. No dramas since new tune :P

Just got to fix up an ongoing tailshaft type vibration. After that will take it down to WSID to get a time.

It has better response/power under 3000rpm than my R33 GTS-t did with the stock turbo B)

...Deadset? Thats pretty damn cool. I sure as hell dont want to go for a ride in Fernis car when its finished...aint enough Prozac getting around

there there Troy... Just put on that GTR bonnet etc, and get three gauges for the centre console and sit in the driveway making car noises. then you will feel like a GTR owner. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...